www.clairbrothers.com
Осуществляется защита проекта
i208
• Three-Way Active Line Array Element
• Frequency Response: 60Hz–20kHz Single Cabinet
• Recommended Power Amplifier: 1000W to 1300W@ 8 Ohms
• Max. Output: Cont. 129 dB SPL, Peak 132 dB SPL
• Drivers: LF: (1) 8”; LMF: (1) 8”; HF: (1) Exit 1.4”; Voice Coil Diameter 3”
• Nominal Impedance: LF: 8 Ohms, LMF: 8 Ohms; HF: 16 Ohms
• Power Handling: LF: 400W Program, 800W Peak; MF: 400W Program, 800W Peak; HF: 220W Program, 440W Peak
• Nominal Dispersion: 120°H x 10°V (Standard); 90°H x 10°V (Optional)
• Input Connection: (2) EP-8 Connectors – 1 Male, 1 Female
• Integral i208 Bimodal Rigging
• Rigging compatible with iS118 Arrayable Subwoofer
i208-i-90 | Installation Active 3-Way Line Array Element, 1x8” LF, 1x8” LMF, 1x1.4”Exit, 3”VC Diam HF (90°H x 10°V) |
i208-WR-90 | Weather Resistant Installation Active 3-Way Line Array Element, (90°H x 10°V) |
i208-i-120 | Installation Active 3-Way Line Array Element, 1x8” LF, 1x8” LMF, 1x1.4”Exit, 3”VC Diam HF (120°H x 10°V) |
i208-WR-120 | Weather Resistant Installation Active 3-Way Line Array Element, (120°H x 10°V) |
i208-M-90 | Mobile Active 3-Way Line Array Element, 1x8” LF, 1x8” LMF, 1x1.4”Exit, 3”VC Diam HF (90°H x 10°V), Rigging quick release pins |
i208-M-120 | Mobile Active 3-Way Line Array Element, 1x8” LF, 1x8” LMF, 1x1.4”Exit, 3”VC Diam HF (120°H x 10°V), Rigging quick release pins |
i212
• Three-Way Active Line Array Element
• Frequency Response: 45Hz–20kHz Single Cabinet
• Recommended Power Amplifier: 1200W to 1800W @ 8 Ohms
• Max. Output: 144 dB SPL @ 1M Bandpass Dependant; 139 dB SPL @ 1M Full Bandwidth
• Drivers: LF: (2) 12”; MF: (4) 6”; HF: (2) Exit 1.4”; Voice Coil Diameter 3”
• Nominal Impedance: LF: 2 x 8 Ohms, MF: 8 Ohms; HF: 8 Ohms
• Power Handling: LF: 1800W; MF: 720W; HF: 320W
• Dispersion: 90°H x 10°V (Standard); 120°H x 10°V (Optional)
• Input Connection: (2) EP-8 Connectors – 1 Male, 1 Female
• Integral i212 Bimodal Rigging
• Rigging compatible with iS218 Subwoofer
i212-i-90 | Installation Active 3-Way Line Array Element, 2x12” LF, 4x6” MF, 2x1.4”Exit, 3”VC Diam HF (90°H x 10°V) |
i212-WR-90 | Weather Resistant Installation Active 3-Way Line Array Element, (90°H x 10°V) |
i212-i-120 | Installation Active 3-Way Line Array Element, 2x12” LF, 4x6” MF, 2x1.4”Exit, 3”VC Diam HF (120°H x 10°V) |
i212-WR-120 | Weather Resistant Installation Active 3-Way Line Array Element, (120°H x 10°V) |
i212-M-90 | Mobile Active 3-Way Line Array Element, 2x12” LF, 4x6” MF, 2x1.4”Exit, 3”VC Diam HF (90°H x 10°V), Rigging quick release pins |
i212-M-120 | Mobile Active 3-Way Line Array Element, 2x12” LF, 4x6” MF, 2x1.4”Exit, 3”VC Diam HF (120°H x 10°V), Rigging quick release pins |
C8
• Three-Way Active (Bi-Amp with Passive Mid/Hi)
• Frequency Response: 60Hz–20kHz (+/- 3dB) | (-10dB) 54Hz–22kHz Single Cabinet
• Recommended Power Amplifier: CB-PLM12K44 or CB-D80:4L
• Max. Output: Cont 135 dB SPL; Peak 145 dB SPL Bandpass Dependent
• Drivers: LF: (2) 8”; MF: (1) 3.5”; HF: (1) Exit 1.4"; VC diameter 1.75"
• Nominal Impedance: LF: 16 Ohms, (MF: 16 Ohms; HF: 16 Ohms): Integrated Passive Crossover Network
• Power Handling: Program (AES) (LF) 800W; (MF) 150W; (HF) 160W
Peak (LF) 1600W; (MF) 500W; (HF) 320W
• Dispersion: Standard: 120°H x 10°V; Optional Horizontal: 50-140°H (10° increments); Clair True Fit: Custom Tailored Continuously Variable
• Input Connection: (2) EP-8 Connectors – 1 Male, 1 Female
C8-i-120 | Installation Active 3-Way (Bi-Amp) Line Array Element, 2x8” LF, 1x3.5” MF, 1x1.4”Exit, 1.75”VC Diam HF (120°H x 10°V) |
C8-i-##° | Installation Active 3-Way (Bi-Amp) Line Array Element, 2x8” LF, 1x3.5” MF, 1x1.4”Exit, 1.75”VC Diam HF (Optional ##° Horizontal Dispersion [50°-to-140° H in 10° increments]) |
C8-M-120 | Mobile Active 3-Way (Bi-Amp) Line Array Element, 2x8” LF, 1x3.5” MF, 1x1.4”Exit, 1.75”VC Diam HF (120°H x 10°V) |
C8-M-##° | Mobile Active 3-Way (Bi-Amp) Line Array Element, 2x8” LF, 1x3.5” MF, 1x1.4”Exit, 1.75”VC Diam HF (Optional ##° Horizontal Dispersion [50°-to-140° H in 10° increments]) |
C8-True Fit | Custom Configured Variable Waveguides |
C12
• Three-Way Active (Bi-Amp with Passive Mid/Hi)
• Frequency Response: 45Hz–20kHz (+/- 2dB) | (-10dB) 28Hz–22kHz Single Cabinet
• Recommended Power Amplifier: CB-PLM12K44 or CB-D120:4L
• Max. Output: 147 dB SPL @ 1M Bandpass Dependent; 142 dB SPL @ 1M Full Bandwidth
• Drivers: LF: (2) 12”; MF: (2) 3.5”; HF: (2) Exit 1.4"; VC diameter 1.75"
• Nominal Impedance: LF: 2 x 8 Ohms, (MF: 16 Ohms; HF: 16 Ohms): Integrated Passive Crossover Network
• Power Handling: LF: AES Power: 1800W, Peak Power: 3800W; MF: AES Power: 300W, Peak Power: 1000W; HF: AES Power: 160 W, Peak Power: 320W
• Dispersion: Standard: 90°H x 10°V; Optional Horizontal: 60-140°H (10° increments); Clair True Fit: Custom Tailored Continuously Variable
• Input Connection: (2) EP-8 Connectors – 1 Male, 1 Female
C12-i-90 | Installation Active 3-Way (Bi-Amp) Line Array Element, 2x12” LF, 2x3.5” MF, 2x1.4”Exit, 1.75”VC Diam HF (90°H x 10°V) |
C12-i-##° | Installation Active 3-Way (Bi-Amp) Line Array Element, 2x12” LF, 2x3.5” MF, 2x1.4”Exit, 1.75”VC Diam HF (Optional ##° Horizontal Dispersion [60°-to-140° H in 10° increments]) |
C12-M-90 | Mobile Active 3-Way (Bi-Amp) Line Array Element, 2x12” LF, 2x3.5” MF, 2x1.4”Exit, 1.75”VC Diam HF (90°H x 10°V) |
C12-M-##° | Mobile Active 3-Way (Bi-Amp) Line Array Element, 2x12” LF, 2x3.5” MF, 2x1.4”Exit, 1.75”VC Diam HF (Optional ##° Horizontal Dispersion [60°-to-140° H in 10° increments]) |
C12-True Fit | Custom Configured Variable Waveguides |
C15
• Three-Way Active Line Array Element
• Frequency Response: 45Hz–20kHz Single Cabinet
• Recommended Power Amplifier: 2250W to 4000W @ 8 Ohms
• Max. Output: 145 dB SPL @ 1M Bandpass Dependant; 149 dB SPL @ 1M Full Bandwidth
• Drivers: LF: (2) 15”; MF: (4) 6”; HF: (4) Exit 1.4”; Voice Coil Diameter 3”
• Nominal Impedance: LF: 2 x 8 Ohms, MF: 8 Ohms; HF: 8 Ohms
• Power Handling: LF: 2400W; MF: 720W; HF: 320W
• Dispersion: 90°H x 10°V
• Input Connection: (2) EP-8 Connectors – 1 Male, 1 Female
C15 3-Way Line Array Element, 2x15” LF, 4x6” MF, 4x1.4”Exit, 3”VC Diam HF (90°H x 10°V)
i218-M
• Three-Way Active Line Array Element
• Frequency Response: 38Hz–20kHz Single Cabinet
• Recommended Power Amplifier: LF: 2000W to 4000W @ 8 Ohms, MF/HF: 1000W to 2000W @ 8 Ohms
• Max. Output: Cont. 136 dB SPL, Full Bandwidth 139 dB SPL, Bandpass Dependent 145 dB SPL
• Drivers: LF: (2) 18”; MF: (6) 6”; HF: (3) Exit 1.4”, Voice Coil Diameter 3”
• Nominal Impedance: LF: 2x 8 Ohms, MF: 5.3 Ohms; HF: 5.3 Ohms
• Power Handling: LF: 2800W; MF: 1080W; HF: 480W
• Dispersion: 90°H x 10°V
• Input Connection: (2) EP-8 Connectors – 1 Male, 1 Female
• Integral i218 Bimodal Rigging
i218-M-90 Mobile Active 3-Way Line Array Element, 2x18” LF, 6x6” MF, 3x1.4”Exit, 3”VC Diam HF (90°H x 10°V), Rigging quick release pins
i218-LT
• Three-Way Active Long Throw Line Array Element
• Frequency Response: 38Hz–18kHz Single Cabinet
• Recommended Power Amplifier: LF: 2000W to 4000W @ 8 Ohms, MF/HF: 1000W to 2000W @ 8 Ohms
• Max. Output: Cont. 139 dB SPL, Peak 142 dB SPL, Bandpass Dependent 146.5 dB SPL
• Drivers: LF: (2) 18”; MF: (6) 6”; HF: (8) Exit 1.4”, Voice Coil Diameter 2.5”
• Nominal Impedance: LF: 2x 8 Ohms, MF: 5.3 Ohms; HF: 5.3 Ohms
• Power Handling: LF: 2800W; MF: 1080W; HF: 1280W
• Dispersion: 90°H x 2.5°V
• Input Connection: (2) EP-8 Connectors – 1 Male, 1 Female
• Integral i218-LT Bimodal Rigging
i218-LT-90x2.5 Mobile Active 3-Way Long Throw Line Array Element, 2x18” LF, 6x6” MF, 8x1.4”Exit, 2.5”VC Diam HF (90°Hx2.5°V), Rigging quick release pins
kiTCURVE12+
• Two-Way Active Loudspeaker
• Frequency Response: 51Hz–20kHz
• Recommended Power Amplifier: 1000W to 1200W @ 8 Ohms
• Max. Output: 131dB SPL (Cont.); 141dB SPL (Peak)
• Drivers: LF: (1) 12"; HF: (2) Exit 1.4"; Voice Coil Diameter 3"
• Nominal Impedance: LF: 8 Ohms HF: 8 Ohms
• Power Handling: (LF) 700W Cont., (HF) 300W Cont.
• Dispersion: Nominal -6dB: 90°H x 15°V
• Input Connection: Signal: (2) XLRConnectors (1 XLR-F In, 1 XLR-M Thru); Power: (2) PowerCon-20aConnectors (1 PowerIn, 1 PowerOut)
• Rigging: kiT Rigging Slots on (4) Corners
kiTCURVE12+ | Active 2-Way Full Range, 12” LF, 2”Exit, 3”VC Diam HF, (90°H x 15°V), Self Powered w/ Amp+DSP |
kiTCURVE12 | Active 2-Way Full Range, 12” LF, 2”Exit, 3”VC Diam HF, (90°H x 15°V), Non-amplified, Bi-Amped Version |
CAT115
• Two-Way Active Curved Line Array Element
• Frequency Response: 39Hz–20kHz
• Recommended Power Amplifier: 1200W to 2400W @ 8 Ohms
• Max. Output: Cont. 131 dB SPL, Peak 133 dB SPL
• Drivers: LF: (1) 15”; HF: (2) Exit 1.4”; Voice Coil Diameter 3”
• Nominal Impedance: LF: 8 Ohms, HF: 8 Ohms
• Power Handling: Cont. LF: 1200W; HF: 320W
• Dispersion: 100°H x 25°V (Single Cabinet)
• Input Connection: (1) 4-Position Terminal Strip
• Integrated Rigging Points
• Array Kit
• Rigging compatible with CS18-II Subwoofer
CAT115 Active 2-Way Curved Line Array Element, 1x15” LF, 2x1.4”Exit, 3”VC Diam HF (100° H x 25° V)
CAT215
• Three-Way Active Curved Line Array Element
• Frequency Response: 39Hz–20kHz
• Recommended Power Amplifier: 1200W to 2400W @ 8 Ohms
• Max. Output: Cont. 134 dB SPL, Peak 137 dB SPL
• Drivers: LF/MF: (2) 15”; HF: (2) Exit 1.4”; Voice Coil Diameter 3”
• Nominal Impedance: LF/MF: 8 Ohms, HF: 8 Ohms
• Power Handling: Cont. LF/MF: 1200W; HF: 320W
• Dispersion: 100°H x 25°V (Single Cabinet)
• Input Connection: (1) 6-Position Terminal Strip
• Integrated Rigging Points
• Array Kit
• Rigging compatible with CS218 Subwoofer
CAT215 Active 3-Way Curved Line Array Element, 1x15” LF, 1x15” MF, 2x1.4”Exit, 3”VC Diam HF(100° H x 25° V)
kiT12
• Two-Way Active/Passive Loudspeaker
• Frequency Response: 63Hz-20kHz
• Recommended Power Amplifier: 1000W to 1200W @ 8 Ohms
• Max. Output: 126 dB SPL (Cont.); 129dB SPL (Peak)
• Drivers: LF: (1) 12"; HF: (1) Exit 2"; Voice Coil Diameter 3"
• Nominal Impedance: LF: 8 Ohms HF: 16 Ohms
• Power Handling: (LF) 500W Cont., (HF) 150W Cont.
• Dispersion: Nominal -6dB: 90°H x 40°V (Rotatable)Optional: 60°H x 40°V (Rotatable)
• Input Connection: (2) EP-4 Connectors (1 Male, 1 Female) & (1) Four-Position Terminal Strip (Standard) -OR- (1) Four-Position Terminal Strip (Install Option)
• Rigging: kiT Rigging Slots on (4) Corners
kiT12 | Active/Passive 2-Way Full Range, 12” LF, 2”Exit, 3”VC Diam HF, (90°H x 40°V) |
kiT12-i | Active/Passive 2-Way Full Range, 12” LF, 2”Exit, 3”VC Diam HF, (90°H x 40°V), Install Version w/ Terminal Strip |
kiT12-PLUS | Active/Passive 2-Way Full Range, 12” LF, 2”Exit, 3”VC Diam HF, (90°H x 40°V), Self Powered Model w/ Amp+ DSP |
kiT12-WR |
Weather Resistant Active/Passive 2-Way Full Range, 12” LF, 2”Exit, 3”VC Diam HF, (90°H x 40°V), 60° H x 40° V Rotatable Horn |
kiT15
• Two-Way Active/Passive Loudspeaker
• Frequency Response: 58Hz-20kHz
• Recommended Power Amplifier: 1000W to 1200W @ 8 Ohms
• Max. Output: 128 dB SPL (Cont.); 131dB SPL (Peak)
• Drivers: LF: (1) 15"; HF: (1) Exit 2"; Voice Coil Diameter 3"
• Nominal Impedance: LF: 8 Ohms HF: 16 Ohms
• Power Handling: (LF) 700W Cont., (HF) 150W Cont.
• Dispersion: Nominal -6dB: 90°H x 40°V (Rotatable) Optional: 60°H x 40°V (Rotatable)
• Input Connection: (2) EP-4 Connectors (1 Male, 1 Female) & (1) Four-Position Terminal Strip (Standard) -OR- (1) Four-Position Terminal Strip (Install Option)
• Rigging: kiT Rigging Slots on (4) Corners
kiT15 | Active/Passive 2-Way Full Range, 15” LF, 2”Exit, 3”VC Diam HF, (90°H x 40°V) |
kiT15-i | Active/Passive 2-Way Full Range, 15” LF, 2”Exit, 3”VC Diam HF, (90°H x 40°V), Install Version w/ Terminal Strip |
kiT15-PLUS | Active/Passive 2-Way Full Range, 15” LF, 2”Exit, 3”VC Diam HF, (90°H x 40°V), Self Powered Model w/ Amp+ DSP |
kiT15-WR |
Weather Resistant Active/Passive 2-Way Full Range, 15” LF, 2”Exit, 3”VC Diam HF, (90°H x 40°V), 60° H x 40° V Rotatable Horn |
kiT12+
• Frequency Response: 63Hz-20kHz
• Recommended Power Amplifier: 1000W to 1200W @ 8 Ohms
• Max. Output: 129dB SPL (Peak)
• Drivers: LF: (1) 12"; HF: (1) Exit 2"; Voice Coil Diameter 3"
• Nominal Impedance: LF: 8 Ohms HF: 16 Ohms
• Power Handling: (LF) 500W Cont., (HF) 150W Cont.
• Dispersion: Standard: 90°H x 40°V (Rotatable); Optional: 60°H x 40°V (Rotatable)
• Input Connections: Signal: (2) XLR Connectors (1 XLR-F In, 1 XLR-M Thru); Power: (2) PowerCon-20aConnectors (1 PowerIn, 1 PowerOut)
• Rigging: kiT Rigging Corners
kiT12+ (94) | Active 2-Way Full Range, 12” LF, 2”Exit, 3”VC Diam HF, (90°H x 40°V), Self Powered w/ Amp+DSP |
kiT12+ (64) | Active 2-Way Full Range, 12” LF, 2”Exit, 3”VC Diam HF, (60°H x 40°V), Self Powered w/ Amp+DSP |
kiT15+
• Two-Way Active Loudspeaker
• Frequency Response: 58Hz–20kHz
• Recommended Power Amplifier: 1000W to 1200W @ 8 Ohms
• Max. Output: 131.5dB SPL (Peak)
• Drivers: LF: (1) 15"; HF: (1) Exit 2"; Voice Coil Diameter 3"
• Nominal Impedance: LF: 8 Ohms HF: 16 Ohms
• Power Handling: (LF) 700W Cont., (HF) 150W Cont.
• Dispersion: Standard: 90°H x 40°V (Rotatable); Optional: 60°H x 40°V (Rotatable)
• Input Connection: (2) XLRConnectors (1 XLR-F In, 1 XLR-M Thru) -OR- (2) PowerCon-20aConnectors (1 PowerIn, 1 PowerOut) (Optional)
• Rigging: kiT Rigging Slots on (4) Corners
kiT15+ (94) | Active 2-Way Full Range, 15” LF, 2”Exit, 3”VC Diam HF, (90°H x 40°V), Self Powered w/ Amp+DSP |
kiT15+ (64) | Active 2-Way Full Range, 15” LF, 2”Exit, 3”VC Diam HF, (60°H x 40°V), Self Powered w/ Amp+DSP |
kiT-Sub+
• Single Driver Powered Sub / Bass
• Frequency Response: 41Hz–250Hz (Single Cabinet (+/- 2dB))
• Recommended Power Amplifier: 2000–3500W @ 8 Ohms
• Max. Output: 134 dB SPL (Cont.)137 dB SPL(Peak)
• Drivers: LF: (1) 18 in.
• Nominal Impedance: 4 Ohms
• Power Handling: 1600W (Cont.); 3200W (Peak)
• Input Connection: Signal: (2) XLRConnectors (1 XLR-F In, 1 XLR-M Thru) (Signal); Power: (2) PowerCon-20aConnectors (1 PowerIn, 1 PowerOut) (Power)
• Rigging: kiT Rigging Slots on (4) Corners
kiT-Sub+ | Single Driver Powered Sub / Bass, 18”, Self Powered w/ Amp+DSP |
kiT-Sub | Single Driver Powered Sub / Bass, 18”, Non-amplified, Bi-Amped Version |
kiT-Sub-mini+
• Single Driver Powered Sub / Bass
• Frequency Response: 41Hz–250Hz (Single Cabinet (+/- 2dB))
• Recommended Power Amplifier: 2000–3500W @ 8 Ohms
• Max. Output: 132 dB SPL (Cont.)135 dB SPL(Peak)
• Drivers: LF: (1) 18 in.
• Nominal Impedance: 4 Ohms
• Power Handling: 1600W (Cont.); 3200W (Peak)
• Input Connection: Signal: (2) XLRConnectors (1 XLR-F In, 1 XLR-M Thru); Power: (2) PowerCon-20aConnectors (1 PowerIn, 1 PowerOut) (Power)
• Rigging: kiT Rigging Slots on (4) Corners
kiT-Sub-mini+ | Compact Single Driver Powered Sub / Bass, 18”, Self Powered w/ Amp+DSP |
kiT-Sub-mini | Compact Single Driver Powered Sub / Bass, 18”, Non-amplified, Bi-Amped Version |
1AM
• Two-Way Coaxial Stage Monitor / Point Source
• Frequency Response: 60Hz–18kHz (+/- 2dB) | 50Hz–20kHz (-10dB)
• Recommended Power Amplifier: 1200–1400W Peak @ 8 Ohms
• Drivers: LF: 12”; HF: 3”
• Nominal Impedance: LF: 8 Ohms, HF: 16 Ohms
• Power Handling: LF: 350W Cont. | 1400W Peak, HF: 80W Cont. | 160W Peak
• For more information, see the Specification Sheet
1AM Two-Way Coaxial Stage Monitor / Point Source
1AM+
• Self-Powered Coaxial Stage Monitor / Point Source
• Frequency Response: 60Hz–18kHz (+/- 2dB) | 50Hz–20kHz (-10dB)
• Power Amplifier: One Series Power Module (see Specification Sheet for details)
• Drivers: LF: 12”; HF: 3”
• Nominal Impedance: LF: 8 Ohms, HF: 16 Ohms
• Power Handling: LF: 350W Cont. | 1400W Peak, HF: 80W Cont. | 160W Peak
• For more information, see the Specification Sheet
1AM+ Self-Powered Coaxial Stage Monitor / Point Source
1.5AM
• Coaxial Stage Monitor
• Frequency Response: 55Hz–18kHz (+/- 2dB) | 43Hz–20kHz (-10dB)
• Recommended Power Amplifier: 1300–2300W Peak @ 8 Ohms
• Max. Output: Peak 136 dB SPL
• Drivers: LF: 15”; HF: 4”
• Nominal Impedance: LF: 8 Ohms, HF: 16 Ohms
• Power Handling: LF: 800W Cont. | 3200W Peak, HF: 130W Cont. | 260W Peak
• Dispersion: 40° H x 60° V (Rotatable)
• Input Connection: (2) EP-4 Connectors (1 Male, 1 Female)
1.5AM Coaxial 15” Stage Monitor
1.5AM+
• Self Powered Coaxial Stage Monitor
• Frequency Response: 60Hz–18kHz (+/- 2dB) | 50Hz–20kHz (-10dB)
• Power Amplifier: 1600W 2-Ch. Amp Module
• Max. Output: Peak 136 dB SPL
• Drivers: LF: 15”; HF: 4”
• Nominal Impedance: LF: 8 Ohms, HF: 16 Ohms
• Power Handling: LF: 800W Cont. | 3200W Peak, HF: 130W Cont. | 260W Peak
• Dispersion: 40° H x 60° V (Rotatable)
• Input Connection: Signal: (1) XLR (F) In, (1) XLR (M) Thru (+10.8dBu Max); Power: PowerCon In/Thru
1.5AM+ Self Powered Coaxial 15” Stage Monitor
12AM
• Two-Way Active Monitor
• Frequency Response: 50Hz–18KHz
• Recommended Power Amplifier: 1200W Peak @ 8 Ohms
• Max. Output: Peak 131 dB SPL
• Drivers: LF: 12”; HF: 2”
• Nominal Impedance: LF: 8 Ohms, HF: 16 Ohms
• Power Handling: LF: 300W Cont., HF: 150W Cont.
• Input Connection: (2) EP-4 Connectors – 2 Male
12AM-L | High Performance Active 12” Stage Monitor, Left Orientation |
12AM-R | High Performance Active 12” Stage Monitor, Right Orientation |
WEDGE
• Two-Way Monitor – Available in Active or Passive models
• Frequency Response: 65Hz–17KHz
• Recommended Power Amplifier: 1200 W Peak @ 8 Ohms
• Max. Output: Peak 131 dB SPL
• Drivers: LF: 12”; HF 2”
• Nominal Impedance: LF: 8 Ohms, HF: 8 Ohms
• Power Handling: LF: 300W Program, HF: 220W Program
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female
WEDGE-L | Active 12” Stage Monitor, Left Orientation |
WEDGE-R | Active 12” Stage Monitor, Right Orientation |
WEDGE-P-L | Passive 12” Stage Monitor, Left Orientation |
WEDGE-P-R | Passive 12” Stage Monitor, Right Orientation |
ML18
• Single Driver Mid-Bass
• Weather Resistant
• Frequency Response: 45Hz–250Hz
• Recommended Power Amplifier: 2000W to 3500W @ 8 Ohms
• Max. Output: Cont. 128 dB SPL, Peak 131 dB SPL
• Driver: LF: 18”
• Nominal Impedance: 8 Ohms
• Power Handling: 1000W Cont.; 2000W Peak
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female
• 12AM stacks on top for 3-way configuration
ML18 Mobile Mid-Bass Cabinet, 1x18”, includes transport dolly
R2D-III
• Two-Way Active or Passive
• Frequency Response: 46Hz–18KHz
• Recommended Power Amplifier: 1000W to 1200W Peak @ 8 Ohms
• Max. Output: Cont. 128 dB SPL, Peak 131 dB SPL
• Drivers: LF: 12”; HF: 2”
• Nominal Impedance: LF: 8 Ohms; HF: 16 Ohms
• Power Handling: LF: 500W Cont.; HF: 150W Cont.
• Nominal -6 dB Dispersion: 90°H x 40°V (60°H x 40°V Optional) Both Rotatable
• Input Connection: (2) EP-4 Connectors - 1 Male, 1 Female & (1) 4-Position Terminal Strip
• Integrated pole mount adaptor (M model only)
• Pole dimensions: Height: 35.4” - 54.3”
• Expanding mandrel system: ⌀ 1.4” - 4”
• Integrated mounting points
R2D-III-94 | Active 2-Way Full Range, 12” LF, 2” HF, (90°H x 40°V) |
R2D-III-P-94 | Passive 2-Way Full Range, 12” LF, 2” HF, (90°H x 40°V) |
R2D-III-WR-94 | Weather Resistant Active 2-Way Full Range, (90°H x 40°V) |
R2D-III-P-WR-94 | Weather Resistant Passive 2-Way Full Range, (90°H x 40°V) |
R2D-III-64 | Active 2-Way Full Range, 12” LF, 2” HF, (60°H x 40°V) |
R2D-III-P-64 | Passive 2-Way Full Range, 12” LF, 2” HF, (60°H x 40°V) |
R2D-III-WR-64 | Weather Resistant Active 2-Way Full Range, (60°H x 40°V) |
R2D-III-P-WR-64 | Weather Resistant Passive 2-Way Full Range, (60°H x 40°V) |
R2D-III-M-94 | Mobile Active 2-Way Full Range, 12” LF, 2” HF, (90°H x 40°V), Equipped with pole mount adaptor & handles |
R2D-III-P-M-94 | Mobile Passive 2-Way Full Range, 12” LF, 2” HF, (90°H x 40°V), Equipped with pole mount adaptor & handles |
R2D-III-M-64 | Mobile Active 2-Way Full Range, 12” LF, 2” HF, (60°H x 40°V), Equipped with pole mount adaptor & handles |
R2D-III-P-M-64 | Mobile Passive 2-Way Full Range, 12” LF, 2” HF, (60°H x 40°V), Equipped with pole mount adaptor & handles |
R2T
• Two-Way Active or Passive
• Frequency Response: 50Hz–18kHz
• Recommended Power Amplifier: LF: 1200W Peak @ 8 Ohms, HF: 150W Peak @ 16 Ohms
• Max. Output: Cont. 121 dB SPL, Peak 126 dB SPL
• Drivers: LF: 12”; HF: 2”
• Nominal Impedance: LF: 8 Ohms; HF: 16 Ohms
• Power Handling: LF: 300W Cont.; HF: 150W Cont.
• Nominal -6 dB Dispersion: 90°H x 40°V, (60°H x 40°V Optional) Both Rotatable
• Input Connection: (1) EP-4 Connector (Standard); (1) 4-Position Terminal Strip (Optional)
• Trap design with integrated mounting points
• Equipped with horizontal infrastructure rigging
R2T-94 | Active 2-Way Full Range, 12” LF, 2” HF, (90°H x 40°V) |
R2T-P-94 | Passive 2-Way Full Range, 12” LF, 2” HF, (90°H x 40°V) |
R2T-WR-94 | Weather Resistant Active 2-Way Full Range, 12” LF, 2” HF, (90°H x 40°V) |
R2T-P-WR-94 | Weather Resistant Passive 2-Way Full Range, 12” LF, 2” HF, (90°H x 40°V) |
R2T-64 | Active 2-Way Full Range, 12” LF, 2” HF, (60°H x 40°V) |
R2T-P-64 | Passive 2-Way Full Range, 12” LF, 2” HF, (60°H x 40°V) |
R2T-WR-64 | Weather Resistant Active 2-Way Full Range, 12” LF, 2” HF, (60°H x 40°V) |
R2T-P-WR-64 | Weather Resistant Passive 2-Way Full Range, 12” LF, 2” HF, (60°H x 40°V) |
R2x2T
• Frequency Response: 46Hz–18kHz
• Recommended Power Amplifier: 1200–1500W Peak @ 8 Ohms
• Max. Output: Cont. 130 dB SPL, Peak 132 dB SPL
• Drivers: LF: 12”; Horn loaded MF: 12”; HF: 2”
• Nominal Impedance: LF: 8 Ohms; MF: 4 Ohms; HF: 16 Ohms
• Power Handling: LF: 500W; MF: 300W; HF: 150W
• Nominal -6 dB Dispersion: 90°H x 60°V, (90°H x 40°V Optional) Both Rotatable
• Input Connection: (1) EP-8 Connector & (1) 6-Position Terminal Strip
• Trap design with integrated mounting points
• Equipped with horizontal infrastructure rigging
R2x2T-96 | Active 3-Way Full Range, 12” LF, 12” Horn loaded MF, 2” HF, (90°H x 60°V) |
R2x2T-94 | Active 3-Way Full Range, 12” LF, 12” Horn loaded MF, 2” HF, (90°H x 40°V) |
R3T-II
• Three-Way Active
• Frequency Response: 40Hz–18kHz
• Recommended Power Amplifier: 1200W to 1800W Peak @ 8 Ohms
• Max. Output: Cont. 131 dB SPL, Peak 137 dB SPL
• Drivers: LF: 18”; MF: 12”; HF: 2”
• Nominal Impedance: LF: 8 Ohms, MF: 8 Ohms, HF: 16 Ohms
• Power Handling: LF: 800W; MF: 300W; HF: 150W
• Nominal -6 dB Dispersion: 90°H x 40°V (60°H x 40°V Optional) Both Rotatable
• Input Connection: (1) EP-8 Connector and (1) 6-Position Terminal Strip
• Trap design with integrated mounting points
• Equipped with horizontal infrastructure rigging frame
• No handles or dolly available
R3T-II-94 | Active 3-Way Full Range, 18” LF, 12” MF, 2” HF, (90°H x 40°V) |
R3T-II-64 | Active 3-Way Full Range, 18” LF, 12” MF, 2” HF, (60°H x 40°V) |
R4-IV
• Three-Way Active
• Frequency Response: 40Hz - 18KHz• Recommended Power Amplifier: 1200W to 1800W @ 8 Ohms
• Max. Output: Cont. 131 dB SPL, Peak 137 dB SPL
• Drivers: LF: 18”, MF: 12”, HF: 2”
• Nominal Impedance: LF: 8 Ohms, MF: 8 Ohms, HF: 16 Ohms
• Power Handling: LF: 800W; MF: 300W; HF: 150W
• Nominal -6 dB Dispersion: 90°H x 40°V (60°H x 40°V Optional) Both Rotatable
• Input Connection: (1) EP-8 Connector
• Integrated corner cargo track rigging
• Dolly not included, see DOL-R4 in accessories
R4-IV-94 | Mobile Active 3-Way Full Range, Handles, 18” LF, 12” MF, 2” HF, (90°H x 40°V) |
R4-IV-64 | Mobile Active 3-Way Full Range, Handles, 18” LF, 12” MF, 2” HF, (60°H x 40°V) |
RC80
• Two-Way Passive
• Frequency Response: 56Hz–18KHz
• Recommended Power Amplifier: 600W @ 4 Ohms
• Max. Output: Cont. 125 dB
• Drivers: LF: (2) 8”; HF: 1”
• Nominal Impedance: 4 Ohms
• Power Handling: 440W Cont.; 1000W Peak
• Dispersion: 90°H x 60°V Rotatable
• Input Connection: (1) EP-4 Connector & (1) 4-Position Terminal Strip
RC80 | Passive 2-Way Full Range Speaker 2x8” LF, 1” HF (90°H x 60°V) |
RC80-WR | Weather Resistant Passive 2-Way Full Range Speaker 2x8” LF, 1” HF (90°H x 60°V) |
F28-V
• Two-Way Active or Passive
• Frequency Response: 51Hz–16KHz
• Recommended Power Amplifier: 1000W @ 4 Ohms
• Max. Output: Cont. 123.5 dB, Peak 126.5 dB
• Drivers: LF: (2) 8”; HF: 1”
• Nominal Impedance: LF: 4 Ohms; HF: 8 Ohms
• Power Handling: 440W Cont.; 1000W Peak
• Dispersion: 90°H x 90°V
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female & (1) 4-Position Terminal Strip
• Integrated pole mount adaptor
• Pole dimensions: Height: 35.4” - 54.3”
• Expanding mandrel system: ⌀ 1.4” - 4”
• Mounting points integral to end caps
F28-V | Active 2-Way Full Range Speaker 2x8” LF, 1” HF (90°H x 90°V), Vertical component orientation |
F28-VP | Passive 2-Way Full Range Speaker 2x8” LF, 1” HF (90°H x 90°V), Vertical component orientation |
F28-H
• Two-Way Active or Passive
• Frequency Response: 51Hz–16KHz
• Recommended Power Amplifier: 1000W @ 4 Ohms
• Max. Output: Cont. 123.5 dB, Peak 126.5 dB
• Drivers: LF: (2) 8”; HF: 1”
• Nominal Impedance: LF: 4 Ohms; HF: 8 Ohms
• Power Handling: 440W Cont.; 1000W Peak
• Dispersion: 90°H x 90°V
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female & (1) 4-Position Terminal Strip
• Mounting points integral to end caps
Specify A or B Baffle Orientation
• A Orientation: Horn on left (user’s left, facing front of speaker)
• B Orientation: Horn on right (user’s right, facing front of speaker)
F28-H | Active 2-Way Full Range Speaker 2x8” LF, 1” HF (90°H x 90°V), Horizontal component orientation |
F28-HP | Passive 2-Way Full Range Speaker 2x8” LF, 1” HF (90°H x 90°V), Horizontal component orientation |
FF2-H
• Two-Way Active or Passive
• Frequency Response: 100Hz–18kHz
• Recommended Power Amplifier: 650W Peak @ 8 Ohms
• Max. Output: LF: Cont. 125.6 dB SPL, Peak 128 dB SPL;HF: Cont. 129.3 dB SPL, Peak 131 dB SPL
• Drivers: LF: 8”; HF: 1”
• Nominal Impedance: LF: 8 Ohms; HF: 8 Ohms
• Power Handling: LF: 250W Cont., 500W Peak; HF: 120W Cont., 240W Peak
• Nominal -6 dB Dispersion: 90°H x 60°V Horn Rotatable
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female & (1) 4-Position Terminal Strip
• Optional Pole Mount; Pole dimensions: Height: 35.4” - 54.3”; Expanding mandrel system: ⌀ 1.4” - 4”
• Mounting points integral to end caps
FF2-H | Active 2-Way Full Range Front Fill, 8” LF, 1” Horn HF, (90°H x 60°V) |
FF2-HP | Passive 2-Way Full Range Front Fill, 8” LF, 1” Horn HF, (90°H x 60°V) |
FF2-H-M | Mobile Active 2-Way Full Range Front Fill, 8” LF, 1” Horn HF (90°H x 60°V) (Ruggedized End Caps) |
FF2-HP-M | Mobile Passive 2-Way Full Range Front Fill, 8” LF, 1” Horn HF (90°H x 60°V) (Ruggedized End Caps) |
FF2-R
• Two-Way Active or Passive Ribbon HF
• Frequency Response: 100Hz– 20kHz Single Cabinet
• Recommended Power Amplifier: 650W Peak @ 8 Ohms
• Max. Output: LF: Cont. 125.6 dB SPL, Peak 128 dB SPL; HF: Cont. 115 dB SPL, Peak 117 dB SPL
• Drivers: LF: 8”; HF: Ribbon
• Nominal Impedance: LF: 8 Ohms, HF: 8 Ohms
• Power Handling: LF: 250W Cont., 500W Peak; HF: 30W Cont., 60W Peak
• Nominal -6 dB Dispersion: 120°H x 10°V; 10°H x 120°V optional
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female & (1) 4-Position Terminal Strip
• Mounting points integral to end caps
• Mini Line Array Configurations
FF2-R | Active 2-Way Full Range Front Fill 8” LF, Ribbon HF, (120°H x10°V) |
FF2-RP | Passive 2-Way Full Range Front Fill 8” LF, Ribbon HF, (120°H x10°V) |
FF2-R-M | Mobile Active 2-Way Full Range Front Fill, 8” LF, Ribbon HF (90°H x 60°V) (Ruggedized End Caps) |
FF2-RP-M | Mobile Passive Active 2-Way Full Range Front Fill, 8” LF, Ribbon HF (90°H x 60°V) (Ruggedized End Caps) |
IRIS
• Two-Way Active
• Frequency Response: 65Hz–18KHz
• Recommended Power Amplifier: 800W @ 8 Ohms
• Max. Output: Cont. 122 dB, Peak 125 dB SPL
• Drivers: LF: (2) 5”; HF: 1”
• Nominal Impedance: LF: 16 Ohms; HF: 16 Ohms
• Power Handling: 220W Cont.; 500W Peak
• Nominal -6 dB Dispersion: 90°H x 60°V; Rotatable
• Input Connection: (1) 4-Position Terminal Strip
• Mounting accessories available
• Solid bamboo end caps, marine-grade sealant, choice of (4) natural wood finishes (see Catalog for options)
IRIS Active 2-Way Full Range Speaker 2x5” LF, 1” HF (90°H x 60°V)
IRIS-II
Two-Way Active or Passive
Frequency Response: 65Hz–18KHz
Recommended Power Amplifier: 800W @ 8 Ohms
Max. Output: Cont. 122 dB, Peak 125 dB SPL
Drivers: LF: (2) 5”; HF: 1”
Nominal Impedance: LF: 16 Ohms; HF: 16 Ohms (Passive 8 Ohms)
Power Handling: 220W Cont.; 500W Peak
Nominal -6 dB Dispersion: 90°H x 60°V; Rotatable
Input Connection: (1) 4-Position Terminal Strip
Mounting accessories available
IRIS-II | Active 2-Way Full Range Speaker 2x5” LF, 1” HF (90°H x 60°V) |
IRIS-II-P | Passive 2-Way Full Range Speaker 2x5” LF, 1” HF (90°H x 60°V) |
RSS
• Two-Way Active or Passive
• Frequency Response: 65Hz–18KHz
• Recommended Power Amplifier: 800W @ 8 Ohms
• Max. Output: Cont. 122 dB SPL, Peak 125 dB SPL
• Drivers: LF: (2) 5”; HF: 1”
• Nominal Impedance: LF: 16 Ohms; HF: 16 Ohms (Passive: 8 Ohms)
• Power Handling: 220W Cont.; 500W Peak
• Nominal -6 dB Dispersion: 90°H x 60°V; Rotatable
• Input Connection: (1) 4-Position Terminal Strip (Standard); (1) EP-4 (Optional)
• Preconstruction Back Box
• Integrated mounting points
RSS | Active 2-Way Full Range Stair Speaker 2x5” LF, 1” HF (90°H x 60°V) |
RSS-P | Passive 2-Way Full Range Stair Speaker 2x5” LF, 1” HF (90°H x 60°V) |
CUB-P
• Two-Way Passive (Standard) or Active (Optional)
• Frequency Response: 65Hz–18KHz
• Recommended Power Amplifier: 800W @ 8 Ohms
• Max. Output: Cont. 122 dB SPL, Peak 125 dB SPL
• Drivers: LF: (2) 5” HF: 1”
• Nominal Impedance: LF: 16 Ohms; HF: 16 Ohms
• Power Handling 220W Cont.; 500W Peak
• Dispersion: 60°H x 90°V Rotatable
• Input Connection: (1) 4-Position Terminal Strip
• Mounting Bracket included
Specify A or B Baffle Orientation
• A Orientation: Horn on left (user’s left, facing front of speaker)
• B Orientation: Horn on right (user’s right, facing front of speaker)
CUB-P | Passive 2-Way Full Range Speaker 2x5” LF, 1” HF (60°H x 90°V) |
CUB | Active 2-Way Full Range Speaker 2x5” LF, 1” HF (60°H x 90°V) |
iS118
• Single Driver Arrayable Subwoofer
• Frequency Response: 34Hz–180Hz; (-10dB Point: 30 Hz)
• Recommended Power Amplifier: 2400W @ 8 Ohms
• Max. Output: Cont. 133 dB SPL, Peak 136 dB SPL
• Driver: 18”
• Nominal Impedance: 8 Ohms
• Power Handling: 2000W Nominal; 4000W Peak
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female
• Maximum angle of 10° between cabinets
• Integral iS118 Bimodal Rigging
• Rigging compatible with i208 Line Array
iS118-i | Installation High Output Arrayable Subwoofer, 18” |
iS118-M | Mobile High Output Arrayable Subwoofer, 18”, Rigging quick release pins |
iS218
• Dual Driver Subwoofer
• Frequency Response: 38Hz–180Hz; (-10dB Point: 32 Hz)
• Recommended Power Amplifier: 2400W to 4000W @ 4 Ohms
• Max. Output: Cont. 132.5 dB SPL, Peak 134 dB SPL
• Drivers: (2) 18”
• Nominal Impedance: 4 Ohms (2 x 8 Ohms)
• Power Handling: 1400W Nominal; 2800W Peak
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female
• Integral iS218 Bimodal Rigging
• Rigging compatible with i212 Line Array
iS218-i | Installation High Output Subwoofer, 2x18” |
iS218-WR | Weather Resistant Installation High Output Subwoofer, 2x18” - With Carbon Fiber Cone |
iS218-M | Mobile High Output Subwoofer, 2x18”, Rigging quick release pins |
12Sx
• Single Driver Reflex Subwoofer
• Frequency Response: (Single Cabinet) 33Hz–125Hz; (-10 dB Point) 27Hz
• Recommended Power Amplifier: 1200W to 1800W @ 8 Ohms
• Max. Output: Cont. 121 dB SPL, Peak 124 dB SPL
• Driver: 12”
• Nominal Impedance: LF: 8 Ohms
• Power Handling: 800W Program, 1200W Peak
• Input Connection: (1) Recessed EP-4 Connector and (1) 2-Position Terminal Strip
12Sx High Output Compact Subwoofer, 12”
CS18-II
• Single Driver Subwoofer
• Frequency Response: 39Hz–180kHz (Single Cabinet), (-10 dB Point) 32 Hz
• Recommended Power Amplifier: 1200W to 1800W @ 8 Ohms
• Max. Output: Cont. 128 dB SPL, Peak 131 dB SPL
• Driver: 18”
• Nominal Impedance: LF: 8 Ohms
• Power Handling: 1400W Peak
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female (Standard); (1) 2-Position Terminal Strip (Optional)
CS18-II | High Output Subwoofer, 18” |
CS18-II-WR | Weather Resistant High Output Subwoofer, 18”; With Carbon Fiber Cone |
CS21
• Single Driver Subwoofer
• Frequency Response: 39Hz–180kHz (Single Cabinet), (-10 dB Point) 32 Hz
• Recommended Power Amplifier: 1200W to 1800W @ 8 Ohms
• Max. Output: Cont. 128 dB SPL, Peak 131 dB SPL
• Driver: LF: 21”
• Nominal Impedance: 8 Ohms
• Power Handling: 700W Cont., 1400W Peak
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female (Standard); (1) 4- Position Terminal Strip (Optional)
CS21 | High Output Subwoofer, 21” |
CS21-WR | Weather Resistant High Output Subwoofer, 21”; With Carbon Fiber Cone |
USLP218
• Dual 18” Low Profile Subwoofer
• Frequency Response: 28Hz-180Hz (Single Cabinet), (-10 dB Point) 20 Hz
• Recommended Power Amplifier: 2400W to 4800W @ 4 Ohms
• Max. Output: Cont. 128 dB SPL, Peak 131 dB SPL
• Driver: LF: (2) 18 in. (457.2mm)
• Nominal Impedance: (2) 8 Ohms
• Power Handling: 1400W-Nominal; 2800W-Peak
• Input Connection: (1) 4-Position Terminal Strip
USLP218 High Output Dual 18” Low Profile Subwoofer, 2x18”
CS218
• Dual 18” Sub-Low
• Frequency Response: (Single Cabinet) 38Hz–180Hz; (-10 dB Point) 32Hz
• Recommended Power Amplifier: 2400W to 4800W @ 4 Ohms
• Max. Output: Cont. 131 dB SPL, Peak 134 dB SPL
• Drivers: (2) 18”
• Nominal Impedance: 2x 8 Ohms
• Power Handling: 1400W-Nominal; 2800W-Peak
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female (Standard); (1) 4-Position Terminal Strip (Optional)
CS218 | High Output Dual 18” Subwoofer, 2x18” |
CS218-WR | Weather Resistant High Output Dual 18” Subwoofer, 2x18”; With Carbon Fiber Cone |
CS18-M
• Mobile Single Driver Subwoofer
• Frequency Response: 39Hz–180kHz (Single Cabinet), (-10 dB Point) 32 Hz
• Recommended Power Amplifier: 1200W to 1800W @ 8 Ohms
• Max. Output: Cont. 128 dB SPL, Peak 131 dB SPL
• Driver: 18”
• Nominal Impedance: LF: 8 Ohms
• Power Handling: 1400W Peak
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female
• Integrated M20 x 2.5 threaded hole with 3/4” depth for pole mount
• Integrated transport dolly included
CS18-M Mobile High Output Subwoofer, 18”, includes transport dolly
CS218-M
• Mobile Dual 18” Sub-Low
• Frequency Response: (Single Cabinet) 38Hz–180Hz; (-10 dB Point) 32Hz
• Recommended Power Amplifier: 2400W to 4800W @ 4 Ohms
• Max. Output: Cont. 131 dB SPL, Peak 134 dB SPL
• Drivers: (2) 18”
• Nominal Impedance: 2x 8 Ohms
• Power Handling: 1400W-Nominal; 2800W-Peak
• Input Connection: (2) EP-4 Connectors – 1 Male, 1 Female
• Integrated transport dolly included
CS218-M Mobile High Output Dual 18” Subwoofer, 2x18”, includes transport dolly
5CB
• Passive Coaxial Point Source
• Frequency Response: 118Hz-18kHz (+/- 2dB) | 90Hz-22kHz (-10dB)
• Recommended Power Amplifier: 200–300W @ 8 Ohms
• Max. Output: 104.8 dB SPL
• Drivers: LF: (1) 5”; HF: (1) 0.75 in. Dome Tweeter
• Nominal Impedance: 8 Ohms
• Power Handling: 100W Program / 400W Peak
• Dispersion: 120° H x 120° V (Conic)
• Input Connection: (2) NL4 SpeakON Connectors & (1) 2-Position Terminal Strip
• Vertical and Horizontal Yoke Mounting Brackets w/ Tilt Adaptors, Threaded Stud Plates (M12 & 3/8-16), Pipe Clamp Mount, Chain Rigging Points, VESA Tilt Mount, Array Mode Top-Bar Plates
5CB Passive Coaxial Point Source; 5” LF, 0.75 in. Dome Tweeter
5CX
• Passive Coaxial Point Source
• Frequency Response: 150Hz-18kHz (+/- 2dB) | 85Hz-20kHz (-10dB)
• Recommended Power Amplifier: 200–300W @ 8 Ohms
• Max. Output: 118 dB SPL
• Drivers: LF: (1) 5”; Exit 1", Voice Coil Diameter 1”
• Nominal Impedance: 8 Ohms
• Power Handling: 100W Program / 400W Peak
• Dispersion: 70° H x 70° V (Conic)
• Input Connection: (2) NL4 SpeakON Connectors & (1) 2-Position Terminal Strip
• Vertical and Horizontal Yoke Mounting Brackets w/ Tilt Adaptors, Threaded Stud Plates (M10, 3/8-16 & 1/2-13), Pipe Clamp Mount, Chain Rigging Points, VESA Tilt Mount, Array Mode Top-Bar Plates
5CX Passive Coaxial Point Source; 5” LF, 1"Exit, 1” VC Diam HF (70°H x 70°V)
8CX
• Passive Coaxial Point Source
• Frequency Response: 100Hz-18kHz (+/- 2dB) | 88Hz-20kHz (-10dB)
• Recommended Power Amplifier: 250–500W @ 8 Ohms
• Max. Output: 128 dB SPL
• Drivers: LF: (1) 8”; Exit 1", Voice Coil Diameter 1.75”
• Nominal Impedance: 8 Ohms
• Power Handling: 250W Program / 500W Peak
• Dispersion: 8CX-P-100: 100° H x 100° V (Conic) -OR-8CX-P-70: 70° H x 70° V (Conic)
• Input Connection: (2) NL4 SpeakON Connectors & (1) 2-Position Terminal Strip
• Vertical and Horizontal Yoke Mounting Brackets w/ Tilt Adaptors, Threaded Stud Plates (M10, 3/8-16 & 1/2-13), Pipe Clamp Mount, Chain Rigging Points, VESA Tilt Mount, Array Mode Top-Bar Plates
8CX-P-100 | Passive Coaxial, Horn-loaded Loudspeaker; 8” LF, 1"Exit, 1.75”VC Diam HF (100°H x 100°V) |
8CX-P-70 | Passive Coaxial, Horn-loaded Loudspeaker; 8” LF, 1"Exit, 1.75”VC Diam HF (70°H x 70°V) |
12CX-C
• Coaxial Passive (Standard) or Active (Optional), Horn-loaded Loudspeaker, no grille
• Frequency Response: 50Hz–16kHz
• Recommended Power Amplifier: 1000–1200W @ 8 Ohms
• Max. Output: (LF) 131 dB SPL, (HF) 133 dB SPL, (Passive Model) 132 dB SPL
• Drivers: LF: (1) 12”; Voice Coil Diameter 3”
• Nominal Impedance: LF: 8 Ohms, HF: 8 Ohms
• Power Handling: (LF) 350W Program, 700W Peak, (HF) 80W Program, 160W Peak
• Dispersion: 60°H x 60°V (Conic)
• Input Connection: Active: (1) 4-Position Terminal Strip; Passive: (1) 2-Position Terminal Strip
• Integrated mounting points
12CX-CP-60 | Passive Coaxial, Horn-loaded Ceiling Loudspeaker 12” LF, 3”VC Diam HF (60°H x 60°V), No grille |
12CX-C-60 | Active Coaxial, Horn-loaded Ceiling Loudspeaker 12” LF, 3”VC Diam HF (60°H x 60°V), No grille |
12CX
• Coaxial Passive (Standard) or Active (Optional), Horn-loaded Loudspeaker, with grille
• Frequency Response: 50Hz–16kHz
• Recommended Power Amplifier: 1000–1200W @ 8 Ohms
• Max. Output: (LF) 131 dB SPL, (HF) 133 dB SPL, (Passive Model) 132 dB SPL
• Drivers: LF: (1) 12”; Voice Coil Diameter 3”
• Nominal Impedance: LF: 8 Ohms, HF: 8 Ohms
• Power Handling: (LF) 350W Program, 700W Peak, (HF) 80W Program, 160W Peak
• Dispersion: 60°H x 60°V (Conic)
• Input Connection: Active: (1) 4-Position Terminal Strip; Passive: (1) 2-Position Terminal Strip
• Integrated mounting points
12CX-P-60 | Passive Coaxial, Horn-loaded Loudspeaker 12” LF, 3”VC Diam HF (60°H x 60°V), Grille |
12CX-60 | Active Coaxial, Horn-loaded Loudspeaker 12” LF, 3”VC Diam HF (60°H x 60°V), Grille |
15CX-C
• Coaxial, Horn-loaded Point Source Loudspeaker, no grille
• Frequency Response: 38Hz–16kHz
• Recommended Power Amplifier: 1000W to 1200W @ 8 Ohms
• Max. Output: (LF) 132 dB SPL, (HF) 133 dB SPL, (Passive Model) 132 dB SPL
• Drivers: LF: (1) 15”; HF: (1) Exit 1.4”; Voice Coil Diameter 3”
• Nominal Impedance: LF: 8 Ohms, HF: 8 Ohms
• Power Handling: (LF) 400W-Program, 800W-Peak, (HF) 80W-Program, 160W-Peak
• Dispersion: 60°H x 60°V (Conic)
• Input Connection: (1) 4-Position Terminal Strip (Standard); (2) EP-4 Connectors – 1 Male, 1 Female (Optional)
• Internal mounting points (2)
15CX-CP | Passive Coaxial, Horn-loaded Loudspeaker 15” LF, 1.4”Exit, 3”VC Diam HF (60°H x 60°V), No grille |
15CX-C | Active Coaxial, Horn-loaded Loudspeaker 15” LF, 1.4”Exit, 3”VC Diam HF (60°H x 60°V), No grille |
15CX
• Coaxial, Horn-loaded Point Source Loudspeaker, with grille
• Frequency Response: 38Hz–16kHz
• Recommended Power Amplifier: 1000W to 1200W @ 8 Ohms
• Max. Output: (LF) 132 dB SPL, (HF) 133 dB SPL, (Passive Model) 132 dB SPL
• Drivers: LF: (1) 15”; HF: (1) Exit 1.4”; Voice Coil Diameter 3”
• Nominal Impedance: LF: 8 Ohms, HF: 8 Ohms
• Power Handling: (LF) 400W-Program, 800W-Peak, (HF) 80W-Program, 160W-Peak
• Dispersion: 60°H x 60°V (Conic)
• Input Connection: (1) 4-Position Terminal Strip (Standard); (2) EP-4 Connectors – 1 Male, 1 Female (Optional)
• Internal mounting points (20)
15CX-P | Passive Coaxial, Horn-loaded Loudspeaker 15” LF, 1.4”Exit, 3”VC Diam HF (60°H x 60°V), Grille |
15CX | Active Coaxial, Horn-loaded Loudspeaker 15” LF, 1.4”Exit, 3”VC Diam HF (60°H x 60°V), Grille |
5cb |
5cx |
8cx |
12CX-60 |
12CX-C-60 |
12CX-CP-60 |
12CX-P-60 |
15CX |
15CX-C |
15CX-CP |
15CX-P |
FX |
RC80 |
CUB |
CUB-P |
F28-H |
F28-HP |
F28-V |
F28-VP |
FF2-H |
FF2-H-M |
FF2-HP |
FF2-HP-M |
FF2-R |
FF2-R-M |
FF2-RP |
FF2-RP-M |
IRIS |
IRIS-II |
IRIS-II-P |
R2D-III-64 |
R2D-III-94 |
R2D-III-M-64 |
R2D-III-M-94 |
R2D-III-P-64 |
R2D-III-P-94 |
R2D-III-P-M-64 |
R2D-III-P-M-94 |
R2D-III-P-WR-64 |
R2D-III-P-WR-94 |
R2D-III-WR-64 |
R2D-III-WR-94 |
R2T-64 |
R2T-94 |
R2T-P-64 |
R2T-P-94 |
R2T-WR-64 |
R2T-WR-94 |
R2TP-WR-64 |
R2TP-WR-94 |
R2x2T-94 |
R2x2T-96 |
R3T-II-64 |
R3T-II-94 |
R4-IV-64 |
R4-IV-94 |
RSS |
RSS-P |
kiT-Sub |
kiT-Sub-mini |
kiT-Sub-mini+ |
kiT-Sub+ |
kIT12 (64) |
kIT12 (94) |
kiT12 Curve |
kiT12 Curve+ |
kIT12+ (64) |
kIT12+ (94) |
kIT12i (64) |
kIT12i (94) |
kIT15 (64) |
kIT15 (94) |
kIT15+ (64) |
kIT15+ (94) |
kIT15i (64) |
kIT15i (94) |
C15 |
CAT115 |
CAT215 |
i208-i-120 |
i208-i-90 |
i208-M-120 |
i208-M-90 |
i208-WR-120 |
i212-i-120 |
i212-i-90 |
i212-M-120 |
i212-M-90 |
i212-WR-120 |
i212-WR-90 |
i218-LT-90x2.5 |
i218-M-90 |
iS118-i |
iS118-M |
iS218-i |
iS218-M |
iS218-WR |
F1-Traveller |
F1-Traveller Plus |
F2-Traveller |
F2-Traveller Plus |
R2-Traveller |
R2-Traveller Plus |
12 AM Left |
12 AM Right |
12VM-PB |
12VM-TE |
ML18 |
WEDGE-L |
WEDGE-P-L |
WEDGE-P-R |
WEDGE-R |
CS218-WR |
USLP |
Tags: Ip54 ip65 ip66 ip67 всепогодные погодозащищенные 170v 100v 70v сниженное пониженное недостаточное напряжение ток скачки напряжения 360 градусов 360° ° суббас суб-бас бас-бокс мидбас мид-бас midbass subbass mid-bass sub-bass рупор рупорные фазоинвертор фазоинвертер
Компрессионный драйвер Твитер твиттер tweeter неодим neodim ferrite феррит неодимовый ферритовый россия европа сша фрг германия италия палки колонки колонны вч сч нч массив линейный line array 21 2*21 3 4 1 1,5 1,75 2 5 5,5 6 6,5 7 8 10 12 15 18 215 218 2*15 2*18 210 212 2*10 2*12 2*8 2*6,5 2*6 2*5 2*5,5 3*1 +3*1 + 2x21 1.5 1.75 5.5 6 6.5 2x15 2x18 2x10 2x12 2x8 2x6,5 2x6 2x5 2x5,5 3x1 +3x1 2х21 2х15 2х18 2х10 2х12 2х8 2х6,5 2х6 2х5 2х5,5 3х1 +3х1 21” 2*21” 3” 4” 1” 1,5” 1,75” 2” 5” 5,5” 6” 6,5” 7” 8” 10” 12” 15” 18” 215” 218” 2*15” 2*18” 210” 212” 208 208” 2*10” 2*12” 2*8” 2*6,5” 2*6” 2*5” 2*5,5” 3*1” +3*1” + 2x21” 1.5” 1.75” 5.5” 6” 6.5” 2x15” 2x18” 2x10” 2x12” 2x8” 2x6,5” 2x6” 2x5” 2x5,5” 3x1” +3x1” 2х21” 2х15” 2х18” 2х10” 2х12” 2х8” 2х6,5” 2х6” 2х5” 2х5,5” 3х1” +3х1”
Дюйм Активный пассивный со встроенным усилением усилителем AES RMS EIAJ program peak пик програм программная рмс музыкальная долговременная номинальная акустика для филармонии театра клуба райдерная клубная ресторанная концертная в мск спб крыму москве петербурге санкт-петербурге ресторана улицы уличная мощность f-1 плоские сателлит кабинет волновод рефлекс reflex bandpass band-pass прямого излучения самая музыкальная высокомузыкальная цвет белый покраска сертификат СТ-1 угол 120° 100° 90° 50° 60° 45° 10º 120 100 90 50 60 45 низкопрофильный монитор студийный киноакустика кино сабвуфер субвуфер subwoofer саб звуковое оборудование пресеты preset процессор контроллер встроенный гц hz db дб дба дбн вт ватт w watt thd сигнал-шум коэффициент нелинейных балтийская береза 15мм 18мм 15 18 мм фанера дерево тополь осина рама граундстэк groundstack подвес подвесная полочная фильтры powersoft ram qsc b&c beyma L-Acoustics D&B Audiotechnik динамик давление частота диапазон пиковая максимальная дешево недорого купить приобрести ндс безнал безналичный дизайн испания самый бюджетный на складе настенные напольные -3 -10 -3дб -10дб -3db -10db верхние средние нижние франция 8 ом 4 ом 16 ом 6 ом ohm 20000 18000 23000 см мм kg кг lbs фунт м 120º