www.auraaudio.fi

Весь модельный ряд на складе

Осуществляется защита проекта

 

A1

http://www.auraaudio.fi/images/a1.png?crc=402199613

A1 is a compact actively driven passive 3-way speaker system. It consists of 15” neodymium magnet low frequency driver, 6.5” cone driver loaded multi-path waveguide and two 0.65” exit compression drivers loaded with dual exit waveguides.

15” low frequency driver is loaded with narrow-Q band-pass horn for extra sensitivity which actually equals two front loaded 15” drivers in SPL over 80-300Hz. With an enclosure not more than the size of single 15” driver this design sets a new bench mark for SPL to size ratio to compact full range speakers.

The heart of A1 is M6 mid frequency driver consisting of 6.5” neodymium magnet cone driver loaded with internationally patented multi-path waveguide. Not only does this technology increase the sensitivity some 10dB but M6 sound channels also cancel harmonics making distortion levels at max SPL between 10-20dB lower than standard speaker systems equal size. M6 also features wide horizontal beam width and high cut off frequency of 4kHz making it possible to use small diaphragm lightweight compression drivers for high frequencies for increased sensitivity and detail. A1 is driven with Aura Audio D2w.A1 powered controller. D2w.A1 features 2 in 4 out matrix with analog filtering, optical limiters and ultra high quality class-D amplifiers powered by high efficiency switch-mode power supply.

APPLICATIONS

Front of house systems

High quality night clubs

Medium size installations

Music reinforcement with subwoofer

A1 - SPECIFICATIONS

Frequency Response (+-3 dB): 85–22000 Hz

Horizontal Coverage (-6 dB): 90 degrees

Vertical Coverage (-6 dB): 15 degrees

Max peak SPL : 137 dB (free space)

Sensitivity LF, 1w/1m: 103 dB (free space)

Sensitivity HF, 1w/1m: 110 dB (free space)

Crossover: 300Hz active, 3.5kHz passive

Power handling LF: 500 W rms, 2000 W pk

Power handling HF: 125 W rms, 500 W pk

Recommended HP-filter: 76 Hz, 24dB/oct

DRIVERS

LF: (1) x 15” neodymium magnet cone driver,

band-pass horn loaded

MF: (1) x 6.5” neodymium magnet cone driver,

horn-loaded

HF: (2) x 0.65” exit compression driver,

dual exit waveguide

ENCLOSURE

Enclosure material: Finnish birch plywood,

textured black paint finish

Grille: Cold rolled steel grille, textured black paint finish

Connectors: (2) x NL4, +/-1: LF, +/-2: HF

Dimensions: 455 mm x 430 mm x 430 mm

Weight: 24 kg

 

A2

http://www.auraaudio.fi/images/a2_front-u5749.png?crc=3955357126

A2 is a compact passive 3-way line array speaker. It consists of two (2) 10” low frequency driver, 6.5” cone driver loaded multi-path waveguide and two (2) 0.65” exit compression drivers loaded with dual exit waveguides. Two (2) 10” low frequency drivers are loaded with narrow-Q band-pass horn for extra sensitivity which actually equals two front loaded 12” drivers in SPL over 150-400Hz. Low frequency response is extended to 65Hz using tuned combined back volume.

The heart of A2, like in its predecessor A1 is M6 mid frequency driver consisting of 6.5” neodymium magnet cone driver loaded with internationally patented multi-path waveguide. Not only does this technology increase the sensitivity 10dB but M6 sound channels also cancel harmonics making distortion levels at max SPL over 10dB lower compared to common direct radiators. M6 also features wide horizontal beam width and high cut off frequency of 4kHz making it possible to use small diaphragm lightweight compression drivers for high frequencies for increased sensitivity and detail. Up to six (6) (2x3) A2 can be driven with Aura Audio D2k.A2 powered controller or up to twenty four (24) with Powersoft X8 amplifier fitted with OEM preset libraries.

APPLICATIONS

Front of house systems

High quality night clubs

Medium to large installations

Music reinforcement with subwoofer

A2 - SPECIFICATIONS

Frequency Response (+-3 dB): 65–22000 Hz

Horizontal Coverage (-6 dB): 90 degrees

Vertical Coverage (-6 dB): 10 degrees

Max peak SPL : 137 dB (free space)

Sensitivity, 1w/1m: 107 dB (free space)

Crossover: 400Hz and 3.5kHz passive 3-way

Power handling: 600 W rms, 2400 W pk

Recommended HP-filter: 65-80 Hz, 12dB/oct

DRIVERS

LF: (2) x 10” cone driver, band-pass horn loaded

MF: (1) x 6.5” neodymium magnet cone driver,

horn-loaded

HF: (2) x 0.65” exit compression driver,

triple exit waveguide

ENCLOSURE

Enclosure material: Finnish birch plywood,

textured black paint finish

Grille: Cold rolled steel grille, textured black paint finish

Connectors: (2) x NL4, +/-1: IN/OUT, +/-2: Link

Dimensions: 700mm x 310mm x 460mm

Weight: 33kg

 

A3

http://www.isp-audio.com/images/blog/Entrevistas/Aura-audio-A3.png

A3 is a large scale 3-way line array speaker. It consists of two (2) 15” low frequency drivers, two (2) 6.5” cone drivers loaded multi-path waveguides and four (4) 0.65” exit compression drivers loaded with dual exit waveguides.

The heart of A3, like in its predecessor A1 is M6 mid frequency driver consisting of 6.5” neodymium magnet cone driver loaded with internationally patented multi-path waveguide. Not only does this technology increase the sensitivity 10dB but M6 sound channels also cancel harmonics making distortion levels at max SPL over 10dB lower compared to common direct radiators. M6 also features wide horizontal beam width and high cut off frequency of 4kHz making it possible to use small diaphragm lightweight compression drivers for high frequencies for increased sensitivity and detail. Up to three (3) A2 can be driven with Aura Audio D2k.A3 powered controller or up to twelve (12) with Powersoft X8 amplifier fitted with OEM preset libraries.

APPLICATIONS

Large scale front of house systems

Medium to large installations

Music reinforcement with or without subwoofer

A3 - SPECIFICATIONS

Frequency Response (+-3 dB): 60–22000 Hz

Horizontal Coverage (-6 dB): 90 degrees

Vertical Coverage (-6 dB): 7 degrees

Max peak SPL : 144 dB (free space)

Sensitivity LF, 1w/1m: 99 dB (free space)

Sensitivity HF, 1w/1m: 113 dB (free space)

Crossover: 400Hz active, 3.5kHz passive

Power handling LF: 1000 W rms, 4000 W pk

Power handling HF: 300 W rms, 1200 W pk

Recommended HP-filter: 45-60 Hz, 12dB/oct

DRIVERS

LF: (2) x 15” cone driver

MF: (2) x 6.5” neodymium magnet cone driver, horn-loaded

HF: (4) x 0.65” exit compression driver, dual exit waveguide

ENCLOSURE

Enclosure material: Finnish birch plywood,

textured black paint finish

Grille: Cold rolled steel grille, textured black paint finish

Connectors: (2) x NL4, +/-1: LF, +/-2: HF

Dimensions: 1250mm x 420mm x 555mm

Weight: 57kg

 

A6

http://www.auraaudio.fi/images/a6-u5738.png?crc=4192684311

A6 is a compact passive 2-way trapezoidal loudspeaker enclosure. It consists of high excursion 6.5” neodymium cone driver and 0,65” exit compression driver loaded with dedicated high directivity horn. With unique 90x12 degree dispersion the loudspeaker makes it easy to cover only a specific area according to installation.

A6 features internal passive crossover, phase-align and EQ network, which ensures a seamless and phase coherent transition between low and high frequency bands. As a multifunctional enclosure A6 features dedicated M8 rigging points. A6Rx rigging systems couple two or more enclosures for seamless vertical or horizontal arrays with user adjustable dispersion. Up to six A6 loudspeakers can be driven with a single D1k power amplifier (16 with D2k) fitted with the A6-preset cards.

APPLICATIONS

Small to medium high-end installations

Touring in mid size venues with subwoofer

Front fills and side fills Corporate events

FEATURES

Array depending vertical coverage pattern

system is configurable from 1 to 12 units

dedicated optional rigging hardware (A6R)

rugged birch plywood construction

textured semi-matt black paint finish

A6 - SPECIFICATIONS - with D2k

Frequency Response (-6 dB): 100 Hz – 20 kHz

Horizontal Coverage (-6 dB): 90 degrees

Vertical Coverage (-6 dB): 12 degrees

Max SPL: 116/121 dB (free space,

 single unit, D2k)

Max SPL: 128/133 dB (free space,

four (4) units, D2k)

Sensitivity, 1w/1m LF: 94 dB (free space)

Nominal Impedance: 16 ohms

(12 ohms minimum)

Power handling: 125 W cont, 500 W peak

DRIVERS

LF: (1) x 6.5” neodymium magnet cone driver,

reflex-tuned

HF: (1) x 0.65” exit compression drivers,

dedicated multi-path waveguide

Enclosure

Enclosure material: Birch plywood,

textured black paint finish

Grille: Cold rolled steel grille,

textured black paint finish

Connectors: (2) x NL4, +/1: IN, +/-2 linked

Dimensions: 305 x 180 x 240mm (265mm incl. rigging hardware)

Weight: 6.5 kg (7kg incl. rigging hardware)

 

A28 SUB

http://www.auraaudio.fi/images/a28_front_shadow.png?crc=278910897

A28 is the first integration of Passive End Fire Technology.

FEATURES

Low frequency directivity control with only

one amplifier channel required

Patented Passive End Fire Technology hybrid

enclosure design

Extremely accurate and

dynamic low frequency reproduction

Double long excursion 18” neodymium

cone drivers

Rugged birch plywood construction

Textured semi-matt black paint finish

APPLICATIONS

Noise sensitive installations

Medium to large scale touring

High end installations from night clubs to live

music venues

Low frequency extension for all A-series tops

A28 - SPECIFICATIONS

Frequency Response (-10 dB): 38 Hz – 250 Hz

Horizontal Coverage (-6 dB): 150 degrees

Vertical Coverage (-6 dB): 150 degrees

Max SPL : 133/139 dB (free space)

Sensitivity, 1w/1m: 101 dB (free space)

Impedance: 6 ohms

Crossover: 80 Hz – 100 Hz active

Power handling: 1800 W(AES), 7200 W(peak)

Recommended HP-filter: 33 Hz, 12 dB/octave

DRIVERS

Front: (1) x 18” neodymium magnet cone driver, 4” voice coil

Rear: (1) x 18” neodymium magnet cone driver, 3” voice coil

ENCLOSURE

Enclosure material: Birch plywood, textured black paint finish

Grille: Cold rolled steel grille, black paint finish

Connectors: (2) x NL4, +/-1: Input, +/-2: Linked

Dimensions: 1000 mm x 580 mm x 860 mm (990 w/wheels)

Weight: 90 kg

 

i3

http://www.auraaudio.fi/images/i3.png?crc=266853863

i3 is a ultra compact passive loudspeaker. It consists of single 3” cone driver. Proprietary acoustic waveguide design increases mid and high frequency efficiency and directivity character. 100x60 degree dispersion makes the loudspeaker easy to adjust according to installation and also vertical columns of two to six units are possible. This feature makes i3 a real all-around work horse with almost limitless possibilities!

Design and modeling concept of the enclosure is done by designer Mr Stefan Lindfors, known for his variety of work around the world. The injection-molded enclosure also features UPM Formi next generation bio-based material. This gives i3 not only unique and timeless look but rigid, lightweight and resonance free features.

i3 does not feature a crossover and reflex tuning, which leads to fully flat phase response and most accurate transient response with no decay and common tuning related problems. As a dedicated installation enclosure i3 features 5mm rigging points and array accessories.

APPLICATIONS

Small to medium installations

Night clubs and music bars

Speech reinforcement

Music reinforcement with XD10 subwoofer

FEATURES

100 x 60 degree coverage pattern

Unique high sensitivity 3” driver

Natural uncoloured sound quality

Dedicated rigging system option

Ultra lite but rigid injection-molded UPM Formi

enclosure Black, white or custom color options

SPECIFICATIONS

Frequency Response (-10 dB): 100 Hz – 20 kHz

Horizontal Coverage (-6 dB): 100 degrees

Vertical Coverage (-6 dB): 60 degrees

Max SPL(cont/peak): 105/112 dB (free space)

Sensitivity 1w/1m: 92 dB (free space)

Impedance: 16 ohms

Crossover: -

Power handling: 20 W cont, 100 W peak

Recommended HP-filter: 120 Hz, 12 dB/octave

Drivers

LF/HF: (1) x 3” neodymium magnet cone driver, horn-loaded

Enclosure

Enclosure material: UPM Formi and steel plate

Grille: Cold rolled steel grille, black foam

Connectors: spring-loaded

Dimensions: 185 mm x 126 mm x 130 mm

Weight: 0.8 kg

 

i5

http://www.auraaudio.fi/images/i12.png?crc=3892774235

i5 is a compact passive column loudspeaker. It consists of five (5) 3” cone drivers in a curved vertical array. Proprietary acoustic waveguide design increases mid and high frequency efficiency, internal summing and directivity character. 90x30 degree dispersion makes the loudspeaker easy to adjust according to installation and also vertical columns of two units are possible. i5 is easily comparable to standard 6"+1" or double 5" boxes but with much better far field projection.

i5 does not feature a crossover, which leads to flat phase response and most accurate transient response with no decay and common tuning related problems. As a multi purpose enclosure i5 features 5mm rigging points and array accessories as well as standard 35mm pole mount adapter.

APPLICATIONS

Small to medium installations

Night clubs and music bars

Speech reinforcement

Music reinforcement with XD10 or XD12 subwoofer

FEATURES

90 x 30 degree coverage pattern

Unique high sensitivity 3” drivers

Natural uncoloured sound quality

Dedicated rigging system option

Comparable to double 5" and 6"+1" speakers

Black or white color options

SPECIFICATIONS

Frequency Response (-10 dB): 100 Hz – 20 kHz

Frequency Response (-5 dB): 120 Hz – 16 kHz

Horizontal Coverage (-6 dB): 90 degrees

Vertical Coverage (-6 dB): 30 degrees

Max SPL(cont/peak): 119/126 dB (free space)

Sensitivity 1w/1m: 99 dB (free space)

Impedance: 3 ohms

Crossover: -

Power handling: 100 W cont, 500 W peak

Recommended HP-filter: 120 Hz, 12 dB/octave

Drivers

LF/HF: (5) x 3” neodymium magnet cone driver, horn-loaded

Enclosure

Enclosure material: Birch plywood, textured black paint finish

Grille: Cold rolled steel grille, black paint finish

Connectors: (1) x NL4, +/-1: Input, +/-2: Linked

Dimensions: 446 mm x 170 mm x 200 mm

Weight: 7 kg

 

F1

http://www.auraaudio.fi/images/f1.png?crc=3795661649

F1 is an active high-end monitor speaker with lowest possible colorations. It features a unique combination of high output, high directivity, extremely well defined stereo image and low distortion levels. It consists of four (4) 3” cone driver loaded with dedicated high directivity horn without crossover. This means wider phase-shift-free frequency band and even higher directivity. With 60x10 degree nominal dispersion F1 makes it easy to cover only a specific area according to installation with lowest possible room coloration.

F1 features Class-D amplifier, analog filter and EQ networks, together with sealed enclosure which ensures a seamless and phase coherent transition between F1 and recommended sub extension F10.

APPLICATIONS

Recording and mastering studios

High-end home theater

Small to medium high-end installations

FEATURES

Extreme power to size ratio

Unusually accurate phase and decay response due

to no crossover

Extended frequency response

to 30Hz with F10

Extremely high quality class D amplifier

High directivity character for low room coloration

Rugged birch plywood construction

Textured semi-matt black paint finish

(other finish options on request)

SPECIFICATIONS

Frequency Response (-4 dB): 90 Hz – 15 kHz

Frequency Response (-10 dB): 65 Hz – 20 kHz

Horizontal Coverage (-6 dB): 60 degrees

Vertical Coverage (-6 dB): 10 degrees

Max SPL: 110/120 dB (continuos/peak, free space)

Sensitivity, 1w/1m: 102 dB (free space)

Nominal Impedance: 4 ohms

Amplifier output: 20 W cont, 100 W peak

Drivers

LF/HF: (4) x 3” cone drivers, dedicated horn

Enclosure

Enclosure material: Birch plywood, textured black paint finish

Signal Connectors: (2) x XLR

Mains Connectors: (1) Neutrik Powercon

Dimensions: 380 x 280 x 200mm

Weight: 7 kg

 

 

 

FSUB

http://www.auraaudio.fi/images/fsub.png?crc=3940542585

FSUB is a horn-loaded low frequency enclosure featuring proprietary dual driver loading (US patent 9014408). As a horn-loaded design FSUB is able to maintain high efficiency and extremely fast peak response with low coloration even at high sound pressure levels. FSUB features dual 12” long excursion cone drivers.

APPLICATIONS

Low frequency extension for F1

Large recording and mastering studios

High-end home installation

Cinema installations

 FEATURES

US patented unique horn design

Extremely accurate and dynamic low frequency

reproduction

Dual long excursion 12” cone driver

Extreme power to size ratio

Rugged birch plywood construction

Textured semi-matt black paint finish

 SPECIFICATIONS

Frequency Response (-10 dB): 25 Hz – 150 Hz

Horizontal Coverage (-6 dB): 360 degrees

Vertical Coverage (-6 dB): 360 degrees

Max SPL : 128/134 dB (half space)

Sensitivity, 1w/1m: 98 dB (half space)

Impedance: 4 ohms

Crossover: 50 Hz – 100 Hz active

Power handling: 1000 W cont, 4000 W peak

Recommended HP-filter: 15 Hz, 12 dB/octave

 Drivers

LF: (2) x 12” cone driver, 3” voice coil

 Enclosure

Enclosure material: Birch plywood, textured black paint finish

Grille (option): Cold rolled steel grille, textured black paint finish

Connectors: (2) x NL4, +/-1: Input, +/-2: Linked

Dimensions: 800 mm x 400 mm x 600 mm

Weight: 70 kg

 

F10

http://www.auraaudio.fi/images/f10.png?crc=390948577

F10 is an active high-end subwoofer. Featuring 10” long excursion cone driver with 3" voice-coil loaded with compact band-pass enclosure this subwoofer outperforms most direct radiating subs this size with far better detail and resolution. F10 features Class-D amplifier, analog filter and limiter networks and is recommended sub extension for F1.

APPLICATIONS

Low frequency extension for F1

Recording and mastering studios

High-end home theater

Small to medium high-end installations

with i3 and Fmicro

FEATURES

Compact band-pass enclosure

Class-D amplifier with switch-mode power supply

Extremely accurate and dynamic low frequency

reproduction

Long excursion 10” cone driver

Extreme power to size ratio

Rugged birch plywood construction

Textured semi-matt black paint finish

SPECIFICATIONS

Frequency Response (-4 dB): 33 Hz – 80 Hz

Frequency Response (-10 dB): 25 Hz – 200 Hz

Max SPL: 110/120 dB (continuos/peak, free space)

Sensitivity, 1w/1m: 92 dB (free space)

Nominal Impedance: 8 ohms

Amplifier output: 300 W cont, 800 W peak

Drivers

LF: (1) x 10” long excursion cone driver

Enclosure

Enclosure material: Birch plywood, textured black paint finish

Signal Connectors: (2) x XLR

Mains Connectors: (1) Neutrik Powercon

Dimensions: 500 x 320 x 320mm

Weight: 14kg

 

XD10

XD-series is a range of next generation subwoofers. Featuring US-patented enclosure design, a combination of assymmetric horn combined with and band-pass loading gives the subwoofer high efficiency, speed and extremely low distortion figures while minimizing the off-band problems common to bass reflex and direct radiating designs. The usable frequency range also increases compared to common designs together with detail and transient output through out the whole usable bass region. the extremely accurate cone control due to three acoustically tuned segments make a huge difference to how the smallest nuances are performed. The reduced Xmax will also maximize the life of the driver.

All these features in a compact size box with no need for complicated reinforcement structures in the enclosure makes the units even liter weight and easier to handle. All XD-series enclosure feature rigid birch plywood construction and weather proof semi-matt paint finish.

APPLICATIONS

Small to medium size installations

Night clubs

Low frequency extension for A6 and C15

High-end home theaters

FEATURES

unique patented design

extremely accurate and dynamic low frequency reproduction

light weight 10” cone driver

extreme power to size ratio

rugged birch plywood construction

textured semi-matt black paint finish

SPECIFICATIONS - with D1k

Frequency Response (-6 dB): 40 Hz – 120 Hz

Horizontal Coverage (-6 dB): 360 degrees

Vertical Coverage (-6 dB): 360 degrees

Max SPL : 123/129 dB (half space)

Sensitivity, 1w/1m: 99 dB (half space)

Impedance: 16 ohms

Power handling: 250 W

Drivers

LF: (1) x 10” cone driver, 2.5” voice coil

Enclosure

Enclosure material: Birch plywood, textured black paint finish

Grille: Cold rolled steel grille, textured black paint finish

Connectors: (2) x NL4, +/-1: Input, +/-2: Linked

Dimensions: 550 mm x 300 mm x 550 mm

Weight: 20 kg

 

XD12

XD-series is a range of next generation subwoofers. Featuring US-patented enclosure design, a combination of assymmetric horn combined with and band-pass loading gives the subwoofer high efficiency, speed and extremely low distortion figures while minimizing the off-band problems common to bass reflex and direct radiating designs. The usable frequency range also increases compared to common designs together with detail and transient output through out the whole usable bass region. the extremely accurate cone control due to three acoustically tuned segments make a huge difference to how the smallest nuances are performed. The reduced Xmax will also maximize the life of the driver.

All these features in a compact size box with no need for complicated reinforcement structures in the enclosure makes the units even liter weight and easier to handle. All XD-series enclosure feature rigid birch plywood construction and weather proof semi-matt paint finish.

XD12 is equipped with ABS handles and large corner mouldings for easy and safe ground stacking.

APPLICATIONS

Touring in small to mid size venues

Subwoofer for drum fills

Medium size installations

Night clubs

Low frequency extension for A6, A1 and C15

FEATURES

Unique patented design

Extremely accurate and dynamic low frequency reproduction

High power, light weight 12” cone driver

Extreme power to size ratio

Rugged birch plywood construction

Textured semi-matt black paint finish

SPECIFICATIONS - with D2k

Frequency Response (-6 dB): 40 Hz – 120 Hz

Horizontal Coverage (-6 dB): 360 degrees

Vertical Coverage (-6 dB): 360 degrees

Max SPL : 130/136 dB (half space)

Sensitivity, 1w/1m: 103 dB (half space)

Impedance: 8 ohms

Power handling: 500 W

Drivers

LF: (1) x 12” cone driver, 3” voice coil

Enclosure

Enclosure material: Birch plywood, textured black paint finish

Grille: Cold rolled steel grille, textured black paint finish

Connectors: (2) x NL4, +/-1: Input, +/-2: Linked

Dimensions: 700 mm x 400 mm x 600 mm

Weight: 25 kg

 

XD18

http://www.auraaudio.fi/images/xd_18.png?crc=4140212675

XD-series is a range of next generation subwoofers. Featuring US-patented enclosure design, a combination of assymmetric horn combined with band-pass loading gives the subwoofer high efficiency, speed and extremely low distortion figures while minimizing the off-band problems common to bass reflex and direct radiating designs. The usable frequency range also increases compared to common designs together with detail and transient output through out the whole usable bass region. The extremely accurate cone control due to three acoustically tuned segments make a huge difference to how the smallest nuances are performed. The reduced Xmax will also maximize the life of the driver.

XD18 is covered with water resistant semimatt black coating and equipped with CNC-machined handles, 100mm heavy duty wheels and ABS corner mouldings for easy and safe ground stacking.

APPLICATIONS

touring in mid and large size venues

subwoofer for drum fills

medium and large size installations

low frequency extension for A6, A1 and C15

FEATURES

unique patented design

extremely accurate and dynamic low frequency reproduction

high power, long excursion 18” cone driver

extreme power to size ratio

rugged birch plywood construction

textured semi-matt black paint finish

SPECIFICATIONS - with D2k

Frequency Response (-10 dB): 33 Hz – 150 Hz

Horizontal Coverage (-6 dB): 360 degrees

Vertical Coverage (-6 dB): 360 degrees

Max SPL: 138/144 dB (half space)

Sensitivity, 1w/1m: 107 dB (half space)

Impedance: 8 ohms

Power handling: 1200 W(rms)

Drivers

LF: (1) x 18” cone driver, 4” voice coil

Enclosure

Enclosure material: Birch plywood,

textured black paint finish

Grille: Cold rolled steel grille,

textured black paint finish

Connectors: (2) x NL4, +/-1: Input, +/-2: Linked

Dimensions: 900 mm x 550 mm x 800 mm (940 w/ wheels)

Weight: 75 kg

 

XD24

http://www.auraaudio.fi/images/xd_24-u946-fr.png?crc=184702643

XD-series is a range of next generation subwoofers. Featuring US-patented enclosure design, a combination of assymmetric horn combined with and band-pass loading gives the subwoofer high efficiency, speed and extremely low distortion figures while minimizing the off-band problems common to bass reflex and direct radiating designs. The usable frequency range also increases compared to common designs together with detail and transient output through out the whole usable bass region. the extremely accurate cone control due to three acoustically tuned segments make a huge difference to how the smallest nuances are performed. The reduced Xmax will also maximize the life of the driver.

XD24 is a dedicated infra subwoofer with wide bandwidth, fast and accurate extension for highest demands. All XD-series enclosure feature rigid birch plywood construction and weather proof semi-matt paint finish. XD24 is equipped with CNC-machined handles and corner mouldings for easy and safe ground stacking.

APPLICATIONS

Touring in large size venues

Infra extension in multi unit PA systems

Large and medium size installations

Infra extension for high-end night clubs

FEATURES

Unique patented design

Extremely accurate and dynamic low frequency reproduction

High power 24” neodymium cone driver

Extreme power to size ratio

Rugged birch plywood construction

Textured semi-matt black paint finish

SPECIFICATIONS - with D2k

Frequency Response (-6 dB): 25 Hz – 80 Hz

Horizontal Coverage (-6 dB): 360 degrees

Vertical Coverage (-6 dB): 360 degrees

Max SPL : 137/143 dB (half space)

Sensitivity, 1w/1m: 107 dB (half space)

Impedance: 8 ohms

Power handling: 1200 W

Drivers

LF: (1) x 24” neodymium magnet cone driver,

6” voice coil

Enclosure

Enclosure material: Birch plywood,

textured black paint finish

Grille: Cold rolled steel grille, textured

black paint finish

Connectors: (2) x NL4, +/-1: Input, +/-2: Linked

Dimensions: 1000 mm x 650 mm x 1000 mm

(1140 w/ wheels)

Weight: 99 kg

 

XD30

http://cdn.soundlightup.com/2015/08/Aura-Audio-XD30.jpg

XD-series is a range of next generation subwoofers. Featuring US-patented enclosure design loaded with 30" Powersoft M-Force driver system, this unique combination sets a new standard in SPL versus cabinet size in bass region.

A combination of assymmetric horn combined with band-pass loading gives XD30 subwoofer high efficiency, speed and extremely low distortion figures while minimizing the off-band problems common to bass reflex and direct radiating designs. The usable frequency range also increases compared to common horn designs together with detail and transient output through out the whole usable bass region. The extremely accurate cone control due to acoustic design combined with pressure sensing feedback loop coupled to DSP yield to low frequency reproduction far more dynamic and linear than achieved with traditional driver technology. Coupled with record braking power handling of 15kW peak and excursion of >3cm peak to peak this monster subwoofer is more than able to compare with three to four traditional direct radiating double 18” subwoofers.

APPLICATIONS

touring in mid and large size venues

medium and large size installations

low frequency extension for A2 and A3

FEATURES

unique patented design

extremely accurate and dynamic low frequency reproduction

high power, long excursion 30”

cone type driver

extreme power to size ratio

dsp and remote control via pc

compares to 3-4 double 18” direct radiators

rugged birch plywood construction

textured semi-matt black paint finish

SPECIFICATIONS - with Powersoft M-Drive module

Frequency Response (-10 dB): 25 Hz – 120 Hz

Horizontal Coverage (-6 dB): 360 degrees

Vertical Coverage (-6 dB): 360 degrees

Max SPL: >150 dB 35-80Hz (half space)

Power handling: 5000 W rms, 15000W pk

DRIVERS

LF: (1) x 30” Powersoft M-Force (reg. trademarks)

ENCLOSURE

Enclosure material: Birch plywood,

textured black paint finish

Grille: Cold rolled steel grille,

textured black paint finish

Connectors: (2) x XLR, 1: gnd, 2:+, 3:-

Dimensions: 1250mm x 800mm x 600mm (740mm w/wheels)

Weight: 115kg

 

C12

http://www.auraaudio.fi/images/c12_front.png?crc=4090696271

C12 is a compact passive two-way extremely low weight and low profile stage wedge loudspeaker enclosure. It consists of coaxial 12” + 1” neodymium driver with separate horn for high frequency part. Featuring 80x60 degree dispersion performer will be able to move more around the stage compared to more direct big brother C15. C12 features internal passive crossover, phase-align and EQ network. Together with coaxial driver technology this ensures a seamless and phase coherent transition between low and high frequency bands. As a multifunctional enclosure C12 features CNC machined handles, 35mm stand adapter inside the handle and optional M8 rigging points.

APPLICATIONS

High SPL stage monitors

Front of house for small to

medium size touring

Medium size installations

Speech reinforcement

Music reinforcement with subwoofer

FEATURES

12” high power coaxial driver

30 degree low profile enclosure

80 x 60 degree HF waveguide

fibre class strengthened birch plywood enclosure

35mm stand adapter

M8 rigging point option

Textured semi-matt black paint finish

C12 - SPECIFICATIONS

Frequency Response (-6 dB): 85 Hz – 20 kHz

Horizontal Coverage (-6 dB): 80 degrees

Vertical Coverage (-6 dB): 60 degrees

Max SPL : 126/132 dB (free space)

Sensitivity, 1w/1m: 99 dB (free space)

Impedance: 8 ohms Crossover: 1.8 kHz passive

Power handling: 500 W cont, 2000 W peak

Recommended HP-filter: 65 Hz, 24 dB/octave

DRIVERS

LF: (1) x 12” neodymium magnet

cone driver, reflex-tuned

HF: (1) x 1” compression driver,

coaxial with separate waveguide

ENCLOSURE

Enclosure material: Bended

birch plywood, textured black paint finish

Grille: Cold rolled steel grille,

textured black paint finish

Connectors: (2) x NL4, +/-1: Input, +/-2: Linked

Dimensions: 585 mm x 430 mm x 295 mm

Weight: 15 kg

 

C15

http://www.auraaudio.fi/images/c15_front.png?crc=3962413336

C15 is a compact passive two-way low profile stage wedge loudspeaker enclosure. It consists of coaxial 15” + 1” neodymium driver with separate horn for high frequency part. With symmetric 50x50 degree dispersion this separate horn enables better control for high frequencies compared to traditional coaxial drivers.

C15 features internal passive crossover, phase-align and EQ network. Together with this unique coaxial driver this ensures a seamless and phase coherent transition between low and high frequency bands. As a multifunctional enclosure C15 features rugged ABS handle, 35mm stand adapter and M8 rigging points. R2 rigging system couples two enclosures for seamless horizontal array with 90 to 120 degree dispersion cluster.

APPLICATIONS

High SPL stage monitors

Front of house for small to medium size touring

Medium size installations

Speech reinforcement

Music reinforcement with subwoofer

FEATURES

15” high power coaxial driver

30 degree low profile enclosure

50 degree symmetrical HF waveguide

fibre class strengthened birch plywood enclosure

35mm stand adapter

M8 rigging points, CR3 compatible

Textured semi-matt black paint finish

C15 - SPECIFICATIONS

Frequency Response (-6 dB): 80 Hz – 20 kHz

Horizontal Coverage (-6 dB): 50 degrees

Vertical Coverage (-6 dB): 50 degrees

Max SPL : 127/133 dB (free space)

Sensitivity, 1w/1m: 100 dB (free space)

Impedance: 8 ohms Crossover: 2.5 kHz passive

Power handling: 500 W cont, 2000 W peak

Recommended HP-filter: 50 Hz, 24 dB/octave

Drivers

LF: (1) x 15” neodymium magnet cone driver, reflex-tuned

HF: (1) x 1” compression driver, coaxial, high directivity waveguide

Enclosure

Enclosure material: Bended birch plywood, textured black paint finish

Grille: Cold rolled steel grille, textured black paint finish

Connectors: (2) x NL4, +/-1: Input, +/-2: Linked

Dimensions: 585 mm x 430 mm x 360 mm

Weight: 18 kg

 

D1K

http://www.auraaudio.fi/images/vahvistin.png?crc=4197961580

D1k Class-D High Efficiency Power Amplifier with Loudspeaker Management.

D-series represents the latest technology in amplifier design. Extremely high fidelity sound with frequency-independent harmonic distortion performance, high efficiency class-D design and very low total weight. D-series amplifiers are also fitted with fixed system controllers for specific loudspeaker including high-pass and low-pass filters, parametric eq and state-of-the-art optical limiter circuit.

D1k features switch-mode power supply with over current and over voltage protection system and optimized low noise cooling system.

Features

High-end analog signal path with optical dynamics processing

Extremely high fidelity class-D power amplifier

Switch-mode power supply

Very low, frequency-independent THD performance

Preconfigured loudspeaker management

90% total efficiency

Very low total weight

Specifications

Output Power (2) 500W(cont)/8ohms both channels driven

Output Power (2) 1500W(peak)/8ohms

THD+N at -3dB <0.3% (1kHz)

THD+N at +10dB limit <1% (1kHz)

Dimensions

483mm(19") x 88mm(2u) x 290mm

Weight: 5kg

 

D2K

http://www.auraaudio.fi/images/vahvistin.png?crc=4197961580

2k Class-D High Efficiency Power Amplifier with Loudspeaker Management.

D-series represents the latest technology in amplifier design. Extremely high fidelity sound with frequency-independent harmonic distortion performance, high efficiency class-D design and very low total weight. D-series amplifiers are also fitted with fixed system controllers for specific loudspeaker including high-pass and low-pass filters, parametric eq and state-of-the-art optical limiter circuit.

D2k features switch-mode power supply with over current and over voltage protection system and optimized low noise cooling system.

Features

High-end analog signal path with optical dynamics processing

Extremely high fidelity class-D

power amplifier

Switch-mode power supply

Very low, frequency-independent

THD performance

Preconfigured loudspeaker management

90% total efficiency

Very low total weight

Specifications

Output Power (2) 1500W(cont)/4ohms or

2ohms both channels driven

Output Power 2000W+1000W(cont)/4ohms

or 2ohms both unsymmetrical mode

THD+N at -3dB <0.3% (1kHz)

THD+N at +10dB limit <1% (1kHz)

Dimensions

483mm(19") x 88mm(2u) x 349mm

Weight: 7kg

 

D2W

http://www.auraaudio.fi/images/vahvistin_2.png?crc=3925581182

D2w Class-D High Efficiency Power Amplifier with Loudspeaker Management. D-series represents the latest technology in amplifier design. Extremely high fidelity sound with frequency-independent harmonic distortion performance, high efficiency class-D design and very low total weight. D-series amplifiers are also fitted with fixed system controllers for specific loudspeaker including high-pass and low-pass filters, parametric eq and state-of-the-art optical limiter circuit.

D2w features 2 in 4 out fixed bi-amp routing, switch-mode power supply with over current and over voltage protection system and optimized low noise cooling system.

Features

High-end analog signal path with optical dynamics processing

Extremely high fidelity class-D power amplifier

Switch-mode power supply

Very low, frequency-independent THD performance

Preconfigured loudspeaker management

90% total efficiency

Very low total weight

Specifications

Output Power (4) 500W(cont)/8ohms

THD+N at -3dB <0.3% (1kHz)

THD+N at +10dB limit <1% (1kHz)

Dimensions

483mm(19") x 88mm(2u) x 349mm

Weight: 6kg

 

D5K

http://www.auraaudio.fi/images/vahvistin.png?crc=4197961580

D5k Class-D High Efficiency Power Amplifier with Loudspeaker Management.

D-series represents the latest technology in amplifier design. Extremely high fidelity sound with frequency-independent harmonic distortion performance, high efficiency class-D design and very low total weight. D-series amplifiers are also fitted with fixed system controllers for specific loudspeaker including high-pass and low-pass filters, parametric eq and state-of-the-art optical limiter circuit.

D5k features dual switch-mode power supply with over current and over voltage protection system and optimized low noise cooling system.

Features

High-end analog signal path with optical dynamics processing

Extremely high fidelity class-D power amplifier

Dual Switch-mode power supply

Very low, frequency-independent THD performance

Optimized for subwoofers

90% total efficiency

Very low total weight

Specifications

Output Power (2) 2500W(cont)/4ohms both channels driven

Output Power (2) 6000W(peak)/4ohms both channels driven

THD+N at -3dB <0.3% (1kHz)

THD+N at +10dB limit <1% (1kHz)

Dimensions

483mm(19") x 88mm(2u) x 429mm

Weight: 9kg