Картинки по запросу fulcrum logo

TQ Install

GX Series

GX Series 2-way loudspeakers include a single-ceramic-magnet coaxial transducer and your choice of 60° x 45°, 75° x 75°, 90° x 45°, or 120° x 60° horns. They provide the output capability and pattern control of a conventional premium 2-way system, but with the directional consistency and crisp transient response that only a coaxial transducer can provide. GX Series loudspeakers are an excellent solution for high-fidelity, foreground distributed systems, and their neat appearance and familiar trapezoidal format facilitates acceptance by interior designers and architects.

GX1265 12 inch Coaxial Loudspeaker, 60° x 45°

Optional YK2413 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 49 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single ceramic magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 128 dB / 122 dB
Dimensions (H x W x D): 610 x 406 x 343 mm / 24.0 x 16.0 x 13.5 in
Weight: 19.5 kg / 43.0 lb

GX1277 12 inch Coaxial Loudspeaker, 75° x 75°

Optional YK2413 Yoke Bracket available.


Operating Mode: Single-amplified w/ DSP
Operating Range: 49 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single ceramic magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 129 dB / 123 dB
Dimensions (H x W x D): 610 x 406 x 343 mm / 24.0 x 16.0 x 13.5 in
Weight: 19.5 kg / 43.0 lb

GX1295 12 inch Coaxial Loudspeaker, 90° x 45°

Optional YK2413 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 49 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single ceramic magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 129 dB / 123 dB
Dimensions (H x W x D): 610 x 406 x 343 mm / 24.0 x 16.0 x 13.5 in
Weight: 19.5 kg / 43.0 lb

GX1226 12 inch Coaxial Loudspeaker, 120° x 60°

Optional YK2413 Yoke Bracket available.


Operating Mode: Single-amplified w/ DSP
Operating Range: 49 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single ceramic magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 129 dB / 123 dB
Dimensions (H x W x D): 610 x 406 x 343 mm / 24.0 x 16.0 x 13.5 in
Weight: 19.5 kg / 43.0 lb

GX1565 15 inch Coaxial Loudspeaker, 60° x 45°

Optional YK3013 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 43 Hz to 18 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single ceramic magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 129 dB / 123 dB
Dimensions (H x W x D): 762 x 527 x 502 mm / 30.0 x 20.7 x 19.8 in
Weight: 27.7 kg / 61.0 lb

 

GX1577 15 inch Coaxial Loudspeaker, 75° x 75°

Optional YK3013 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 43 Hz to 19 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single ceramic magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 129 dB / 123 dB
Dimensions (H x W x D): 762 x 527 x 502 mm / 30.0 x 20.7 x 19.8 in
Weight: 27.7 kg / 61.0 lb

GX1595 15 inch Coaxial Loudspeaker, 90° x 45°

Optional YK3013 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 43 Hz to 19 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single ceramic magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 129 dB / 123 dB
Dimensions (H x W x D): 762 x 527 x 502 mm / 30.0 x 20.7 x 19.8 in
Weight: 27.7 kg / 61.0 lb

GX1526 15 inch Coaxial Loudspeaker, 120° x 60°

Optional YK3013 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 43 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single ceramic magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 128 dB / 122 dB
Dimensions (H x W x D): 762 x 527 x 502 mm / 30.0 x 20.7 x 19.8 in
Weight: 27.7 kg / 61.0 lb

CX Series

CX Series 2-way loudspeakers include powerful single-neodymium-magnet coaxial transducers. They provide the output capability and pattern control of normal premium 2-way systems in significantly more compact enclosures. The 8-inch model comes with a 90° x 60° horn; 12- and 15-inch models offer a choice of 60° x 45°, 75° x 75°, 90° x 45°, or 120° x 60° horns. CX Series’ unique vertically trapezoidal shape and compact size allows mounting very close to ceilings or under balconies with minimal effect on sight lines, while in turn complementing many architectural styles.

CX896 8 inch Coaxial Loudspeaker, 90° x 60°

Optional YK1408 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 81 Hz to 20 kHz
HF/LF Transducers: Coaxial 1.7″ titanium diaphragm compression driver; 8.0″ woofer, 2.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 250 W @ 16 Ω
Equalized Maximum SPL (peak / continuous): 124 dB / 118 dB
Dimensions (H x W x D): 306 x 362 x 298 mm / 12.1 x 14.3 x 11.7 in
Weight: 7.7 kg / 17.0 lb

CX826 8 inch Coaxial Loudspeaker, 120° x 60°

NEW!

Optional YK1408 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 78 Hz to 20 kHz
HF/LF Transducers: Coaxial 1.7″ titanium diaphragm compression driver; 8.0″ woofer, 2.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 250 W @ 16 Ω
Equalized Maximum SPL (peak / continuous): 124 dB / 118 dB
Dimensions (H x W x D): 306 x 362 x 298 mm / 12.1 x 14.3 x 11.7 in
Weight: 7.7 kg / 17.0 lb

CX1265 12 inch Coaxial Loudspeaker, 60° x 45°

Optional YK1811 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 69 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 130 dB / 124 dB
Dimensions (H x W x D): 412 x 456 x 371 mm / 16.2 x 17.9 x 14.6 in
Weight: 14.5 kg / 32.0 lb

CCX1265 12 inch Subcardioid Coaxial Loudspeaker, 60° x 45°

NEW!

A coaxial, passive subcardioid loudspeaker that provides 9 dB of low frequency attenuation in the rear hemisphere. Optional YK1811 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 72 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 128 dB / 122 dB
Dimensions (H x W x D): 412 x 456 x 371 mm / 16.2 x 17.9 x 14.6 in
Weight: 14.5 kg / 32.0 lb

CX1277 12 inch Coaxial Loudspeaker, 75° x 75°

Optional YK1811 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 69 Hz to 18 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 130 dB / 124 dB
Dimensions (H x W x D): 412 x 456 x 371 mm / 16.2 x 17.9 x 14.6 in
Weight: 14.5 kg / 32.0 lb

CCX1277 12 inch Subcardioid Coaxial Loudspeaker, 75° x 75°

NEW!

A coaxial, passive subcardioid loudspeaker that provides 9 dB of low frequency attenuation in the rear hemisphere. Optional YK1811 Yoke Bracket available.


Operating Mode: Single-amplified w/ DSP
Operating Range: 71 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 128 dB / 122 dB
Dimensions (H x W x D): 412 x 456 x 371 mm / 16.2 x 17.9 x 14.6 in
Weight: 14.5 kg / 32.0 lb

CX1295 12 inch Coaxial Loudspeaker, 90° x 45°

Optional YK1811 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 69 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 129 dB / 123 dB
Dimensions (H x W x D): 412 x 456 x 371 mm / 16.2 x 17.9 x 14.6 in
Weight: 14.5 kg / 32.0 lb

CCX1295 12 inch Subcardioid Coaxial Loudspeaker, 90° x 45°

A coaxial, passive subcardioid loudspeaker that provides 9 dB of low frequency attenuation in the rear hemisphere. Optional YK1811 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 71 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 128 dB / 122 dB
Dimensions (H x W x D): 412 x 456 x 371 mm / 16.2 x 17.9 x 14.6 in
Weight: 14.5 kg / 32.0 lb

CX1226 12 inch Coaxial Loudspeaker, 120° x 60°

Optional YK1811 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 69 Hz to 18 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 130 dB / 124 dB
Dimensions (H x W x D): 412 x 456 x 371 mm / 16.2 x 17.9 x 14.6 in
Weight: 14.5 kg / 32.0 lb

CCX1226 12 inch Subcardioid Coaxial Loudspeaker, 120° x 60°

NEW!

A coaxial, passive subcardioid loudspeaker that provides 9 dB of low frequency attenuation in the rear hemisphere. Optional YK1811 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 71 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 129 dB / 123 dB
Dimensions (H x W x D): 412 x 456 x 371 mm / 16.2 x 17.9 x 14.6 in
Weight: 14.5 kg / 32.0 lb

CCX1200 12 inch Subcardioid Coaxial Loudspeaker, 100° x 100°

NEW!

A coaxial, passive subcardioid loudspeaker that provides 9 dB of low frequency attenuation in the rear hemisphere. Optional YK1811 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 71 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 128 dB / 122 dB
Dimensions (H x W x D): 412 x 456 x 371 mm / 16.2 x 17.9 x 14.6 in
Weight: 14.5 kg / 32.0 lb

CX1565 15 inch Coaxial Loudspeaker, 60° x 45°

Optional YK2211 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 57 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 131 dB / 125 dB
Dimensions (H x W x D): 505 x 557 x 467 mm / 19.9 x 21.9 x 18.4 in
Weight: 19.3 kg / 42.5 lb

CX1577 15 inch Coaxial Loudspeaker, 75° x 75°

Optional YK2211 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 57 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 131 dB / 125 dB
Dimensions (H x W x D): 505 x 557 x 467 mm / 19.9 x 21.9 x 18.4 in
Weight: 19.3 kg / 42.5 lb

CX1595 15 inch Coaxial Loudspeaker, 90° x 45°

Optional YK2211 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 57 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 131 dB / 125 dB
Dimensions (H x W x D): 505 x 557 x 467 mm / 19.9 x 21.9 x 18.4 in
Weight: 19.3 kg / 42.5 lb

CX1526 15 inch Coaxial Loudspeaker, 120° x 60°

Optional YK2211 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 58 Hz to 17 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 131 dB / 125 dB
Dimensions (H x W x D): 505 x 557 x 467 mm / 19.9 x 21.9 x 18.4 in
Weight: 19.3 kg / 42.5 lb

DX Series

DX Series 3-way loudspeakers provide the output and pattern control of two low frequency transducers in an enclosure size that would typically house a conventional 2-way system. They include a single-neodymium-magnet coaxial transducer and a powerful ceramic magnet low frequency transducer. The two low frequency devices both operate down to the lowest frequencies, resulting in mutual coupling that provides unusually high efficiency and impact in the critical 80 Hz to 500 Hz range. The dual 8-inch model comes with a 90° x 60° horn; dual 12- and 15-inch models offer a choice of 60° x 45°, 75° x 75°, 90° x 45°, or 120° x 60° horns.

 

DX896 Dual 8 inch Coaxial Loudspeaker, 90° x 60°

Optional YK2008 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 72 Hz to 20 kHz
LF Transducer: 8.0″ ceramic magnet woofer, 2.0″ voice coil
HF/LF Transducers: Coaxial 1.7″ titanium diaphragm compression driver; 8.0″ woofer, 2.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 500 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 130 dB / 124 dB
Dimensions (H x W x D): 502 x 299 x 280 mm / 19.8 x 11.8 x 11.0 in
Weight: 14.1 kg / 31.0 lb

DX1265 Dual 12 inch Coaxial Loudspeaker, 60° x 45°

Optional YK2813 Yoke Bracket available.

Operating Mode: Bi-amplified w/ DSP
Operating Range: 50 Hz to 20 kHz
LF Transducer: 12.0″ ceramic magnet woofer, 3.0″ voice coil
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: LF 350 @ 8 Ω, HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 133 dB / 127 dB
Dimensions (H x W x D): 711 x 457 x 406 mm / 28.0 x 18.0 x 16.0 in
Weight: 28.6 kg / 63.0 lb

DX1277 Dual 12 inch Coaxial Loudspeaker, 75° x 75°

Optional YK2813 Yoke Bracket available.

Operating Mode: Bi-amplified w/ DSP
Operating Range: 50 Hz to 20 kHz
LF Transducer: 12.0″ ceramic magnet woofer, 3.0″ voice coil
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: LF 350 @ 8 Ω, HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 132 dB / 126 dB
Dimensions: (H x W x D): 711 x 457 x 406 mm / 28.0 x 18.0 x 16.0 in
Weight: 28.6 kg / 63.0 lb

DX1295 Dual 12 inch Coaxial Loudspeaker, 90° x 45°

Optional YK2813 Yoke Bracket available.

Operating Mode: Bi-amplified w/ DSP
Operating Range: 49 Hz to 19 kHz
LF Transducer: 12.0″ ceramic magnet woofer, 3.0″ voice coil
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: LF 350 @ 8 Ω, HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 133 dB / 127 dB
Dimensions (H x W x D): 711 x 457 x 406 mm / 28.0 x 18.0 x 16.0 in
Weight: 28.6 kg / 63.0 lb

DX1226 Dual 12 inch Coaxial Loudspeaker, 120° x 60°

Optional YK2813 Yoke Bracket available.

Operating Mode: Bi-amplified w/ DSP
Operating Range: 50 Hz to 19 kHz
LF Transducer: 12.0″ ceramic magnet woofer, 3.0″ voice coil
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: LF 350 @ 8 Ω, HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 132 dB / 126 dB
Dimensions (H x W x D): 711 x 457 x 406 mm / 28.0 x 18.0 x 16.0 in
Weight: 28.6 kg / 63.0 lb

DX1565 Dual 15 inch Coaxial Loudspeaker, 60° x 45°

Operating Mode: Bi-amplified w/ DSP
Operating Range: 42 Hz to 20 kHz
LF Transducer: 15.0″ ceramic magnet woofer, 4.0″ voice coil
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: LF 700 @ 8 Ω, HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 133 dB / 127 dB
Dimensions (H x W x D): 861 x 529 x 457 mm / 33.9 x 20.8 x 18.0 in
Weight: 40.4 kg / 89.0 lb

DX1577 Dual 15 inch Coaxial Loudspeaker, 75° x 75°

Operating Mode: Bi-amplified w/ DSP
Operating Range: 42 Hz to 20 kHz
LF Transducer: 15.0″ ceramic magnet woofer, 4.0″ voice coil
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: LF 700 @ 8 Ω, HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 134 dB / 128 dB
Dimensions (H x W x D): 861 x 529 x 457 mm / 33.9 x 20.8 x 18.0 in
Weight: 40.4 kg / 89.0 lb

DX1595 Dual 15 inch Coaxial Loudspeaker, 90° x 45

Operating Mode: Bi-amplified w/ DSP
Operating Range: 42 Hz to 20 kHz
LF Transducer: 15.0″ ceramic magnet woofer, 4.0″ voice coil
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: LF 700 @ 8 Ω, HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 135 dB / 129 dB
Dimensions (H x W x D): 861 x 529 x 457 mm / 33.9 x 20.8 x 18.0 in
Weight: 40.4 kg / 89.0 lb

DX1526 Dual 15 inch Coaxial Loudspeaker, 120° x 60°

Operating Mode: Bi-amplified w/ DSP
Operating Range: 42 Hz to 20 kHz
LF Transducer: 15.0″ ceramic magnet woofer, 4.0″ voice coil
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: LF 700 @ 8 Ω, HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 134 dB / 128 dB
Dimensions (H x W x D): 861 x 529 x 457 mm / 33.9 x 20.8 x 18.0 in
Weight: 40.4 kg / 89.0 lb

AH Series

AH Series loudspeakers are a bi-amplified 2-way, high sensitivity, arrayable coaxial horn systems that provide precise pattern control to below 400 Hz, low frequency extension to below 80 Hz, and extremely high output with modest amplifier power. They are particularly effective in acoustically challenging spaces where broadband pattern control is necessary, and in applications requiring high acoustic output and high fidelity. A unique, compact trapezoidal shape allows AH loudspeakers to be deployed with their trapezoidal profile vertically oriented for stand-alone use, in distributed systems, or in vertical arrays; or with its trapezoidal profile horizontally oriented for use in horizontal tight-packed arrays.

AH463 High Efficiency Full-Range Coaxial Horn, 60° x 30°

Operating Mode: Bi-amplified w/ DSP
Operating Range: 67 Hz to 17 kHz
LF Transducers: 4x 10.0” ceramic magnet cone driver, 3.0” voice coil
HF Transducer: 2x 4.0″ titanium diaphragm, neodymium magnet compression driver
Power Handling @ Nominal Impedance: LF 1400 W @ 4 Ω, HF 400 W @ 4 Ω
Equalized Maximum SPL (peak / continuous): 145 dB / 139 dB
Dimensions (H x W x D): 991 x 813 x 728 mm / 39.0 x 32.0 x 28.7 in
Weight: 87.5 kg / 193.0 lb

AH65 High Efficiency Full-Range Coaxial Horn, 60° x 45°

Operating Mode: Bi-amplified w/ DSP
Operating Range: 75 Hz to 19 kHz
LF Transducers: 2x 10.0” ceramic magnet cone driver, 3.0” voice coil
HF Transducer: 4.0″ titanium diaphragm, neodymium magnet compression driver
Power Handling @ Nominal Impedance: LF 700 W @ 8 Ω, HF 200 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 141 dB / 135 dB
Dimensions (H x W x D): 813 x 813 x 704 mm / 32.0 x 32.0 x 27.7 in
Weight: 58.6 kg / 129.0 lb

AH96 High Efficiency Full-Range Coaxial Horn, 90° x 60°

Operating Mode: Bi-amplified w/ DSP
Operating Range: 76 Hz to 20 kHz
LF Transducers: 2x 10.0” ceramic magnet cone driver, 3.0” voice coil
HF Transducer: 4.0″ titanium diaphragm, neodymium magnet compression driver
Power Handling @ Nominal Impedance: LF 700 W @ 8 Ω, HF 200 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 141 dB / 135 dB
Dimensions (H x W x D): 813 x 813 x 542 mm / 32.0 x 32.0 x 21.3 in
Weight: 52.2 kg / 115.0 lb

RX Series

The RX Series is comprised of high efficiency, high fidelity coaxial loudspeakers that provide output capability typical of a much larger loudspeaker. Their transducer’s high-efficiency and horn-loaded HF compression driver give them a surprisingly high output-to-size ratio, and their broad 90° x 90° coverage is particularly effective in close quarters. RX Series loudspeakers are an excellent option any time moderately high SPLs are required but limited space is available. Spoken word sounds very natural, and the coaxial design assures that this remains so even off-axis. Low frequency extension to 100 Hz enables them to integrate well with subwoofers for full range music reproduction.

RX599 5.25 inch Coaxial Loudspeaker, 90° x 90°

The RX599 is nominally 16 ohms. Model RX599-MT30 includes a 70 volt, 30 watt, multi-tap transformer. Optional YK905 Yoke Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 100 Hz to 20 kHz
HF/LF Transducers: Coaxial 1.0″ diaphragm compression driver, neodymium magnet; 5.25″ woofer, 1.7″ voice coil; ceramic magnet
Power Handling @ Nominal Impedance: HF/LF 150 W @ 16 Ω
Equalized Maximum SPL (peak / continuous): 113 dB / 107 dB
Dimensions (H x W x D): 220 x 151 x 142 mm / 8.7 x 6.0 x 5.6 in
Weight: 3.9 kg / 8.5 lb

RX699 6.5 inch Coaxial Loudspeaker, 90° x 90°

The RX699 is nominally 16 ohms. Model RX699-MT60 includes a 70 volt, 60 watt, multi-tap transformer. Optional YK1106 U Bracket available. 


Operating Mode: Single-amplified w/ DSP
Operating Range: 87 Hz to 20 kHz
HF/LF Transducers: Coaxial 1.0″ diaphragm compression driver, neodymium magnet; 6.5″ woofer, 2.0″ voice coil; ceramic magnet
Power Handling @ Nominal Impedance: HF/LF 175 W @ 16 Ω
Equalized Maximum SPL (peak / continuous): 118 dB / 112 dB
Dimensions (H x W x D): 273 x 181 x 165 mm / 10.8 x 7.1 x 6.5 in
Weight (RX699): 5.4 kg / 12.0 lb
Weight (RX699-MT60): 5.9 kg / 13.0 lb

FX Series

FX Series loudspeakers are portable, coaxial stage monitors that provide the output capability and pattern control of a normal 2-way loudspeaker in a significantly more compact enclosure. Their single-neodymium-magnet coaxial transducer and HF horn provide broad coverage, and their large format compression drivers assure robust high frequency headroom. The clarity and source separation provided by FX Series loudspeakers allows performers to clearly distinguish their own voice in the midst of many others; a capability which not only helps the performers, but makes monitor mixing easier and less critical. In addition, their unique shape and compact size makes them unusually unobtrusive on stage, and non-distracting on camera.

FX896 8 inch Coaxial Vocal Monitor, 90° x 60°

Operating Mode: Single-amplified w/ DSP
Operating Range: 94 Hz to 21 kHz
HF/LF Transducers: Coaxial 1.7″ titanium diaphragm compression driver; 8.0″ woofer, 2.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 250 W @ 16 Ω
Equalized Maximum SPL (peak / continuous): 126 dB / 120 dB
Dimensions (H x W x D): 252 x 311 x 352 mm / 9.9 x 12.2 x 13.9 in
Weight: 6.8 kg / 15.0 lb

FX1295 12 inch Coaxial Vocal Monitor, 90° x 45°

Operating Mode: Single-amplified w/ DSP
Operating Range: 90 Hz to 17 kHz
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 132 dB / 126 dB
Dimensions (H x W x D): 456 x 412 x 324 mm / 17.9 x 16.2 x 12.8 in
Weight: 11.3 kg / 25.0 lb

TQP Series Processing

This 4-input, 8-output signal processor provides full support for Fulcrum Acoustic's FIR-based Level 1 Temporal Equalization (TQ) loudspeaker settings. Fulcrum loudspeakers tuned to Level 1 provide a crisper stereo image, greater soundstage depth, more separation between components of a complex mix, increased resistance to feedback, improved arrayability, more seamless transitions between distributed loudspeakers and a less fatiguing listening experience at very high SPLs.

TQP48 4x8 Level 1 TQ DSP Processor

Frequency Response: 20 Hz to 20 kHz, +/- 0.25 dB
Dynamic Range: >114 dB, unweighted
Latency: 2.21ms at 48 kHz
Input/Output Types: Active balanced (analog), Euroblock connectors

VLF Install

Sub112 12 inch Direct-Radiating Subwoofer

Designed to provide low frequency support in installations requiring high SPLs from a very compact enclosure.

Operating Mode: Single-amplified w/ DSP
Operating Range: 32 Hz to 135 Hz
LF Transducer: 12.0″ woofer, 4.0″ voice coil; ceramic magnet
Power Handling @ Nominal Impedance: 700 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 128 dB / 122 dB (half space)
Dimensions (H x W x D): 572 x 375 x 313 mm / 22.5 x 14.8 x 12.3 in
Weight: 20.9 kg / 46.0 lb

Sub115 15 inch Direct-Radiating Subwoofer

Designed to provide low frequency support in installations requiring high SPLs from a compact enclosure.

Operating Mode: Single-amplified w/ DSP
Operating Range: 30 Hz to 135 Hz
LF Transducer: 15.0″ woofer, 4.0″ voice coil; ceramic magnet
Power Handling @ Nominal Impedance: 700 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 132 dB / 126 dB (half space)
Dimensions (H x W x D): 625 x 500 x 483 mm / 24.6 x 19.7 x 19.0 in
Weight: 30.8 kg / 68.0 lb

Sub215 Dual 15 in Direct-Radiating Subwoofer

Designed to provide low frequency support in installations requiring high SPLs.

Operating Mode: Single- or dual-amplified w/ DSP
Operating Range: 25 Hz to 141 Hz
LF Transducers: 2x 15.0″ woofers, 4.0″ voice coil; ceramic magnet
Power Handling @ Nominal Impedance: 2000 W @ 4 Ω
Equalized Maximum SPL (peak / continuous): 137 dB / 131 dB (half space)
Dimensions (H x W x D): 756 x 621 x 498 mm / 29.8 x 24.6 x 19.6 in
Weight: 57.4 kg / 127.0 lb

Sub118 18 inch Direct-Radiating Subwoofer

Designed to provide extended low frequency support in a wide variety of installations.

Operating Mode: Single-amplified w/ DSP
Operating Range: 25 Hz to 141 Hz
LF Transducer: 18.0″ woofer, 4.0″ voice coil; ceramic magnet
Power Handling @ Nominal Impedance: 1200 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 135 dB / 129 dB (half space)
Dimensions (H x W x D): 756 x 624 x 498 mm / 29.8 x 24.6 x 19.6 in
Weight: 41.7 kg / 92.0 lb

Sub218Lac Self-Powered Dual 18 in Direct-Radiating Subwoofer

Designed to provide extended low frequency support and high SPLs in installations that require a low profile enclosure. Onboard amplification and DSP are designed and manufactured in Italy by Powersoft. Four back panel selectable presets tailor the response for the most common configurations. In addition, a full complement of input filters and delay, as well as signal levels and amplifier status, may be accessed via Ethernet, using Armonia Pro Audio Suite™ control software. 

Operating Mode: Self-powered, w/ on-board DSP
Operating Range: 24 Hz to 152 Hz
LF Transducers: 2x 18.0″ woofers, 4.0″ voice coil; ceramic magnet
Amplifier Output Power: 2x 1600 W @ 4 Ω
Equalized Maximum SPL (peak / continuous): 141 dB / 135 dB (half space)
Dimensions (H x W x D): 524 x 1143 x 762 mm / 20.6 x 45.0 x 30.0 in
Weight: 75.7 kg / 167.0 lb

Sub218L Dual 18 in Direct-Radiating Subwoofer

Designed to provide extended low frequency support and high SPLs in installations that require a low profile enclosure.

Operating Mode: Single- or dual-amplified w/ DSP
Operating Range: 24 Hz to 152 Hz
LF Transducers: 2x 18.0″ woofers, 4.0″ voice coil; ceramic magnet
Power Handling @ Nominal Impedance: 2400 W @ 4 Ω
Equalized Maximum SPL (peak / continuous): 141 dB / 135 dB (half space)
Dimensions (H x W x D): 524 x 1143 x 762 mm / 20.6 x 45.0 x 30.0 in
Weight: 73.9 kg / 163.0 lb

Sub218 Dual 18 in Direct-Radiating Subwoofer

Designed to provide extended low frequency support and high SPLs in a wide variety of installations.

Operating Mode: Single- or dual-amplified w/ DSP
Operating Range: 25 Hz to 154 Hz
LF Transducers: 2x 18.0″ woofers, 4.0″ voice coil; ceramic magnet
Power Handling @ Nominal Impedance: 2400 W @ 4 Ω
Equalized Maximum SPL (peak / continuous): 141 dB / 135 dB (half space)
Dimensions (H x W x D): 1067 x 711 x 660 mm / 42.0 x 28.0 x 26.0 in
Weight: 80.3 kg / 177.0 lb

US208 Dual 8 inch Direct-Radiating Subwoofer

A baby sister to the US212; it provides similar impact and musicality, and does so from an enclosure that may be built into even smaller cavities or banquettes.

Operating Mode: Single- or dual-amplified w/ DSP
Operating Range: 33 Hz to 141 Hz
LF Transducers: 2x 8.0″ woofers, 2.5″ voice coil; ceramic magnet
Power Handling @ Nominal Impedance: 500 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 127 dB / 121 dB (half space)
Dimensions (H x W x D): 253 x 533 x 457 mm / 9.9 x 21.0 x 18.0 in
Weight: 19.1 kg / 42.0 lb

US212 Dual 12 inch Direct-Radiating Subwoofer

A baby brother to the US221; it provides similar impact and musicality, and does so from an enclosure that may be built into small cavities or banquettes.

Operating Mode: Single- or dual-amplified w/ DSP
Operating Range: 35 Hz to 152 Hz
LF Transducers: 2x 12.0″ woofers, 4.0″ voice coil; neodymium magnet
Power Handling @ Nominal Impedance: 1400 W @ 4 Ω
Equalized Maximum SPL (peak / continuous): 134 dB / 128 dB (half space)
Dimensions (H x W x D): 351 x 610 x 533 mm / 13.8 x 24.0 x 21.0 in
Weight: 31.3 kg / 69.0 lb

US221-4 Dual 21 inch Direct-Radiating Subwoofer

Ultra-compact, direct-radiating subwoofer that is designed to provide gut churning impact and solid musicality – not just infrasonic effects. Paralleling its two 8 ohm woofers provides a 4 ohm load. Up to two US221-4 may thus be powered by a single channel of a high power amplifier.

Operating Mode: Single- or dual-amplified w/ DSP
Operating Range: 28 Hz to 188 Hz
LF Transducers: 2x 21.0″ woofers, 6.0″ voice coil; neodymium magnet
Power Handling @ Nominal Impedance: 4000 W @ 4 Ω
Equalized Maximum SPL (peak / continuous): 143 dB / 137 dB (half space)
Dimensions (H x W x D): 568 x 891 x 762 mm / 22.4 x 35.1 x 30.0 in
Weight: 80.3 kg / 177.0 lb

US221-2 Dual 21 inch Direct-Radiating Subwoofer

Ultra-compact, direct-radiating subwoofer that is designed to provide gut churning impact and solid musicality – not just infrasonic effects. Paralleling its two 4 ohms woofers provides a 2 ohm load. The US221-2 may be powered by an amplifier with less voltage swing than the US221-4 variant.

Operating Mode: Single- or dual-amplified w/ DSP
Operating Range: 28 Hz to 188 Hz
LF Transducers: 2x 21.0″ woofers, 6.0″ voice coil; neodymium magnet
Power Handling @ Nominal Impedance: 4000 W @ 2 Ω
Equalized Maximum SPL (peak / continuous): 143 dB / 137 dB (half space)
Dimensions (H x W x D): 568 x 891 x 762 mm / 22.4 x 35.1 x 30.0 in
Weight: 80.3 kg / 177.0 lb

Prophile Series

P 8 inch Coaxial Loudspeaker, 100° x 100°

Ultra-compact, 2-way coaxial system with very wide dispersion; an excellent option where high SPL is required but extremely limited space is available. Low frequency extension to below 100 Hz enables it to integrate well with subwoofers, and at 16 ohms, the P is an ideal choice for low impedance distributed systems where a high loudspeaker-to-amplifier ratio is desirable. Optional YK1308 U Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 90 Hz to 20 kHz
HF/LF Transducers: Coaxial 1.7″ titanium diaphragm compression driver; 8.0″ woofer, 2.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 250 W @ 16 Ω
Equalized Maximum SPL (peak / continuous): 125 dB / 119 dB
Dimensions (H x W x D): 250 x 313 x 294 mm / 9.9 x 12.3 x 11.6 in
Weight: 7.3 kg / 16.0 lb

S Dual 8 inch Coaxial Loudspeaker, 100° x 100°

Compact 3-way coaxial system with very wide dispersion; the dedicated low frequency transducer provides extra mid bass impact. Its horizontal orientation, small vertical dimension, and trapezoidal shape allow it to be positioned extremely close to ceilings and under balconies. The S’s low profile also makes it very useful as a front fill system when placed on the edge of or installed into a stage apron. Optional YK1808 U Bracket available.

Operating Mode: Single-amplified w/ DSP
Operating Range: 80 Hz to 20 kHz
LF Transducer: 8.0″ ceramic magnet woofer, 2.0″ voice coil
HF/LF Transducers: Coaxial 1.7″ titanium diaphragm compression driver; 8.0″ woofer, 2.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: HF/LF 500 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 129 dB / 123 dB
Dimensions (H x W x D): 250 x 457 x 294 mm / 9.9 x 18.0 x 11.6 in
Weight: 15.4 kg / 34.0 lb

M Dual 12 inch Coaxial Loudspeaker, 75° x 75°

A 3-way coaxial system with wide dispersion; an excellent option any time visceral impact and/or high SPL is needed from a package less than 40 centimeters tall. The M’s dedicated low frequency transducer was selected to provide maximum mid bass impact, and the coaxial driver’s conical horn is ideal for the wide by wide coverage requirements of near field applications. Optional YK3013 U Bracket available.

Operating Mode: Bi-amplfied w/ DSP
Operating Range: 49 Hz to 20 kHz
LF Transducer: 12.0″ ceramic magnet woofer, 4.0″ voice coil
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 12.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: LF 700 W @ 8 Ω, HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 134 dB / 128 dB
Dimensions (H x W x D): 391 x 762 x 457 mm / 15.4 x 30.0 x 18.0 in
Weight: 34.5 kg / 76.0 lb

L Dual 15 inch Coaxial Loudspeaker, 75° x 75°

A 3-way coaxial system with wide dispersion; an excellent option any time low frequency extension, visceral impact, and/or high SPL is needed from a package less than 48 centimeters tall. The L’s dedicated low frequency transducer was selected to provide maximum mid bass impact, and the coaxial driver’s conical horn is ideal for the wide-by-wide coverage requirements of near field applications.

Operating Mode: Bi-amplfied w/ DSP
Operating Range: 35 Hz to 19 kHz
LF Transducer: 15.0″ ceramic magnet woofer, 4.0″ voice coil
HF/LF Transducers: Coaxial 3.0″ titanium diaphragm compression driver; 15.0″ woofer, 3.0″ voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: LF 1000 W @ 8 Ω, HF/LF 400 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 135 dB / 129 dB
Dimensions (H x W x D): 472 x 914 x 533 mm / 18.6 x 36.0 x 21.0 in
Weight: 48.5 kg / 107.0 lb

FA Portable

FA28ac Self-Powered Dual 8 inch Coaxial Loudspeaker, 90° x 60°

A portable, 3-way multi-purpose loudspeaker. Its rotatable horn provides broad coverage that is beneficial in both stage monitor and mains operation. Its multi-faceted enclosure includes a pole mount socket, 40° and 50° rear angles for stage monitor use, and M10 threaded accessory plates for use with optional suspension hardware such as the FA28 Yoke Bracket. Onboard amplification and DSP are designed and manufactured in Italy by Powersoft. Four back panel selectable presets tailor the response for the most common configurations. In addition, a full complement of input filters and delay, as well as signal levels and amplifier status, may be accessed via Ethernet, using Armonia Pro Audio Suite™ control software.

Operating Mode: Self-powered, w/ on-board DSP
Operating Range: 49 Hz to 20 kHz
LF Transducer: 8.0″ ceramic magnet woofer, 2.0″ voice coil
HF/LF Transducers: Coaxial 1.7″ titanium diaphragm compression driver; 8.0″ woofer, 2.0″ voice coil; single neodymium magnet
Amplifier Output Power: 2x 570 W @ 16 Ω
Equalized Maximum SPL (peak / continuous): 127 dB / 121 dB
Dimensions (H x W x D): 502 x 299 x 321 mm / 19.8 x 11.8 x 12.7 in
Weight: 17.2 kg / 38.0 lb

FA12ac Self-Powered 12 inch Coaxial Loudspeaker, 90° x 45°

A portable, 2-way multi-purpose loudspeaker. Its rotatable horn provides broad coverage that is beneficial in both stage monitor and mains operation. Its multi-faceted enclosure includes a pole mount socket, 40° and 55° rear angles for stage monitor use, and M10 threaded accessory plates for use with optional suspension hardware such as the FA12 Yoke Bracket. Onboard amplification and DSP are designed and manufactured in Italy by Powersoft. Four back panel selectable presets tailor the response for the most common configurations. In addition, a full complement of input filters and delay, as well as signal levels and amplifier status, may be accessed via Ethernet, using Armonia Pro Audio Suite™ control software. 

Operating Mode: Self-powered, w/ on-board DSP
Operating Range: 46 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0” titanium diaphragm compression driver; 12.0” woofer, 3.0” voice coil; single neodymium magnet
Amplifier Output Power: 2x 1050 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 127 dB / 121 dB
Dimensions (H x W x D): 456 x 557 x 375 mm / 17.9 x 21.9 x 14.8 in
Weight: 21.1 kg / 46.5 lb

FA15ac Self-Powered 15 inch Coaxial Loudspeaker, 90° x 45°

A portable, 2-way multi-purpose loudspeaker. Its rotatable horn provides broad coverage that is beneficial in both stage monitor and mains operation. Its multi-faceted enclosure includes a pole mount socket, 45° and 55° rear angles for stage monitor use, and M10 threaded accessory plates for use with optional suspension hardware such as the FA15 Yoke Bracket. Onboard amplification and DSP are designed and manufactured in Italy by Powersoft. Four back panel selectable presets tailor the response for the most common configurations. In addition, a full complement of input filters and delay, as well as signal levels and amplifier status, may be accessed via Ethernet, using Armonia Pro Audio Suite™ control software. 

Operating Mode: Self-powered, w/ on-board DSP
Operating Range: 43 Hz to 20 kHz
HF/LF Transducers: Coaxial 3.0” titanium diaphragm compression driver; 15.0” woofer, 3.0” voice coil; single neodymium magnet
Amplifier Output Power: 2x 1050 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 129 dB / 123 dB
Dimensions (H x W x D): 557 x 660 x 433 mm / 21.9 x 26.0 x 17.1 in
Weight: 29.5 kg / 65.0 lb

FA22ac Self-Powered Dual 12 inch Coaxial Loudspeaker, 90° x 45°

A portable, 3-way multi-purpose loudspeaker. Its rotatable horn provides broad coverage that is beneficial in both stage monitor and mains operation. Its multi-faceted enclosure includes a pole mount socket, 40° and 55° rear angles for stage monitor use, and M10 threaded accessory plates for use with optional suspension hardware such as the FA22 Yoke Bracket. Onboard amplification and DSP are designed and manufactured in Italy by Powersoft. Four back panel selectable presets tailor the response for the most common configurations. In addition, a full complement of input filters and delay, as well as signal levels and amplifier status, may be accessed via Ethernet, using Armonia Pro Audio Suite™ control software. 

Operating Mode: Self-powered, w/ on-board DSP
Operating Range: 44 Hz to 20 kHz
LF Transducer: 12.0” single neodymium magnet woofer, 3.0” voice coil
HF/LF Transducers: Coaxial 3.0” titanium diaphragm compression driver; 12.0” woofer, 3.0” voice coil; single neodymium magnet
Amplifier Output Power: 2x 1050 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 130 dB / 124 dB
Dimensions (H x W x D): 711 x 456 x 375 mm / 28.0 x 17.9 x 14.8 in
Weight: 27.2 kg / 60 lb

TS212 Dual 12 in Direct-Radiating Subwoofer

A dual 12-inch, ultra-compact subwoofer that is designed to provide impressive low frequency impact and solid musicality. Its 4-inch voice coils, strong neodymium magnets, and innovative low-turbulence ports permit an optimal tuning to be achieved in an enclosure that is unusually small for a dual 12-inch subwoofer. It provides big subwoofer sound in a package that one person can easily transport, and its low profile allows it to fit into out-of-the-way places. It is an ideal solution for corporate A/V, television/radio productions, theatrical productions, nightclub PA, portable DJ systems, and more.

Operating Mode: Single- or dual-amplified w/ DSP
Operating Range: 31 Hz to 156 Hz
LF Transducers: 2x 12.0″ woofers, 4.0″ voice coil; neodymium magnet
Power Handling @ Nominal Impedance: 1400 W @ 4 Ω
Equalized Maximum SPL (peak / continuous): 134 dB / 128 dB (half space)
Dimensions (H x W x D): 385 x 694 x 559 mm / 15.2 x 27.3 x 22.0 in
Weight: 34.9 kg / 77.0 lb

TS212ac Dual 12 in Direct-Radiating Subwoofer

A dual 12-inch, ultra-compact subwoofer that is designed to provide impressive low frequency impact and solid musicality. Its 4 inch voice coils, strong neodymium magnets, and innovative low-turbulence ports permit an optimal tuning to be achieved in an enclosure that is unusually small for a dual 12 inch subwoofer. Onboard amplification and DSP are designed and manufactured in Italy by Powersoft. Four back panel selectable presets tailor the response for the most common configurations. In addition, a full complement of input filters and delay, as well as signal levels and amplifier status, may be accessed via Ethernet, using Armonia Pro Audio Suite™ control software.

Operating Mode: Self-powered, w/ on-board DSP
Operating Range: 31 Hz to 156 Hz
LF Transducers: 2x 12.0″ woofers, 4.0″ voice coil; neodymium magnet
Amplifier Output Power: 2x 1100 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 134 dB / 128 dB (half space)
Dimensions (H x W x D): 385 x 694 x 559 mm / 15.2 x 27.3 x 22.0 in
Weight: 37.0 kg / 81.5 lb

TS215 Dual 15 inch Direct-Radiating Subwoofer

A portable, dual 15-inch subwoofer that is designed to provide impressive low frequency impact and solid musicality. Its 4.5-inch voice coils, strong neodymium magnets, and innovative low-turbulence ports permit an optimal tuning to be achieved in an enclosure that is unusually small for a dual 15-inch subwoofer. It massive output capability rivals that of many conventional dual 18-inch subwoofers, while its compact size reduces transport costs and saves precious truck space and venue real estate. It is an ideal solution for nightclub PA, drum/side fill monitoring, corporate A/V, theatrical productions, and more.

Operating Mode: Single- or dual-amplified w/ DSP
Operating Range: 30 Hz to 154 Hz
LF Transducers: 2x 15.0″ woofers, 4.5″ voice coil; neodymium magnet
Power Handling @ Nominal Impedance: 3000 W @ 4 Ω
Equalized Maximum SPL (peak / continuous): 140 dB / 134 dB (half space)
Dimensions (H x W x D): 445 x 852 x 660 mm / 17.5 x 33.5 x 26.0 in
Weight: 51.7 kg / 114.0 lb

TS215ac Self-Powered Dual 15 inch Direct-Radiating Subwoofer

A portable, dual 15-inch subwoofer that is designed to provide impressive low frequency impact and solid musicality. Its 4.5-inch voice coils, strong neodymium magnets, and innovative low-turbulence ports permit an optimal tuning to be achieved in an enclosure that is unusually small for a dual 15-inch subwoofer. It massive output capability rivals that of many conventional dual 18-inch subwoofers, while its compact size reduces transport costs and saves precious truck space and venue real estate. Onboard amplification and DSP are designed and manufactured in Italy by Powersoft. Four back panel selectable presets tailor the response for the most common configurations. In addition, a full complement of input filters and delay, as well as signal levels and amplifier status, may be accessed via Ethernet, using Armonia Pro Audio Suite™ control software. 

Operating Mode: Self-powered, w/ on-board DSP
Operating Range: 30 Hz to 154 Hz
LF Transducers: 2x 15.0″ woofers, 4.5″ voice coil; neodymium magnet
Amplifier Output Power: 2x 1600 W @ 4 Ω
Equalized Maximum SPL (peak / continuous): 140 dB / 134 dB (half space)
Dimensions (H x W x D): 445 x 852 x 660 mm / 17.5 x 33.5 x 26.0 in
Weight: 53.9 kg / 118.5 lb

TS221 Dual 21 inch Direct-Radiating Subwoofer

A portable, dual 21-inch subwoofer designed to provide gut churning impact and solid musicality – not just infrasonic effects. Its 6-inch voice coils, strong neodymium magnets, unusually rigid cones, and innovative low-turbulence ports permit an optimal tuning to be achieved in an enclosure that is light in weight and truck-pack friendly. It is perfectly suited for highly dynamic touring systems, live performance venues, and nightclubs. Its massive output capability matches that of two to three conventional dual 18-inch subwoofers, reducing transport costs and saving precious truck space and venue real estate.

Operating Mode: Single- or dual-amplified w/ DSP
Operating Range: 25 Hz to 154 Hz
LF Transducers: 2x 21.0″ woofers, 6.0″ voice coil; neodymium magnet
Power Handling @ Nominal Impedance: 4000 W @ 4 Ω
Equalized Maximum SPL (peak / continuous): 144 dB / 138 dB (half space)
Dimensions (H x W x D): 580 x 1142 x 813 mm / 22.8 x 45.0 x 32 in
Weight: 91.6 kg / 202.0 lb

Reference Monitors

RM Series

RM Series loudspeakers are 3-way coaxial reference monitors that provide the accuracy, pristine imaging and precise transient response required of a studio monitor but with the directional control, power handling and output capability required in larger spaces. They are typically installed behind perforated cinema screens or acoustically transparent cloth, flush-mounted in walls, or mounted in free space in A/V studio control rooms. They include on-board TQ™ Level 1 digital signal processing and Powersoft amplification. A full complement of input filters and delay, as well as signal levels and amplifier status, may be accessed via Ethernet, using Armonia Pro Audio Suite™control software. In addition, a pre-output EQ stage is available for programming custom presets. These presets may be saved and later recalled using the back panel Preset Select button or software.

RM28ac Self-Powered Dual 8 inch Coaxial Reference Monitor, 90° x 60°

Operating Mode: Self-powered, w/ On-Board DSP
Operating Range: 40 Hz to 24 kHz
LF Transducer: 8.0” ceramic magnet woofer, 2.0” voice coil
HF/LF Transducers: Coaxial 1.7” titanium diaphragm compression driver; 8.0” woofer, 2.0” voice coil; single neodymium magnet
Amplifier Output Power: 2x 570 W @ 16 Ω
Equalized Maximum SPL (peak / continuous): 126 dB / 120 dB
Dimensions (H x W x D): 533 x 321 x 349 mm / 21.0 x 12.6 x 13.7 in
Weight: 18.6 kg / 41.0 lb

RM22ac Self-Powered Dual 12 inch Coaxial Reference Monitor, 90° x 45°

Operating Mode: Self-powered, w/ On-Board DSP
Operating Range: 37 Hz to 20 kHz
LF Transducer: 12.0” ceramic magnet woofer, 4.0” voice coil
HF/LF Transducers: Coaxial 3.0” titanium diaphragm compression driver; 12.0” woofer, 3.0” voice coil; single neodymium magnet
Amplifier Output Power: 2x 1050 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 128 dB / 122 dB
Dimensions (H x W x D): 762 x 457 x 458 mm / 30.0 x 18.0 x 18.1 in
Weight: 39.5 kg / 87.0 lb

RM25ac Self-Powered Dual 15 inch Coaxial Reference Monitor, 90° x 45°

Operating Mode: Self-powered, w/ On-Board DSP
Operating Range: 24 Hz to 20 kHz
LF Transducer: 15.0” ceramic magnet woofer, 4.0” voice coil
HF/LF Transducers: Coaxial 3.0” titanium diaphragm compression driver; 15.0” woofer, 3.0” voice coil; single neodymium magnet
Amplifier Output Power: 2x 1050 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 132 dB / 126 dB
Dimensions (H x W x D): 953 x 572 x 511 mm / 37.5 x 22.5 x 20.1 in
Weight: 53.1 kg / 117.0 lb

Linearray

FL283 Dual 8 inch Subcardioid Line Array Module

The FL283 is a subcardioid line array module intended for permanent installation in a wide range of venues. It includes dual 8-inch horn-loaded woofers and three 1.4-inch compression drivers in a compact enclosure. The enclosure is shaped to accommodate up to 20 degrees of splay between adjacent enclosures, allowing for more sharply curved arrays than comparable line arrays. Each FL283 module is configured for full-range passive operation at 16 ohms, allowing up to eight units to be driven from a single power amplifier channel. Up to twelve modules may be suspended with a 10:1 design factor.

Operating Mode: Single-amplified w/ DSP
Operating Range: 54 Hz to 19.6 kHz
HF/LF Transducers: 3x 1.4” titanium diaphragm, neodymium magnet compression driver; 2x 8.0” ceramic magnet cone driver, 2.0” voice coil
Power Handling @ Nominal Impedance: HF/LF 500 W @ 16 Ω
Equalized Maximum SPL One Module (peak / continuous): 128 dB / 122 dB
Equalized Maximum SPL Eight Modules (peak / continuous): 146 dB / 140 dB
Dimensions (H x W x D): 324 x 586 x 491 mm / 12.8 x 23.1 x 19.3 in
Weight: 25.6 kg / 57.0 lb

FLS115 15 inch Subcardioid Subwoofer

The FLS115 is a subcardioid line array subwoofer module intended for permanent installation in a wide range of venues. It includes a single, high power 15-inch direct-radiating woofer in a compact enclosure.  The FLS115’s rigging is designed to easily attach to the FL283 subcardioid line array module. The enclosure is shaped to accommodate up to 20 degrees of splay between adjacent enclosures, allowing for more sharply curved arrays than comparable line array subwoofers. Up to twelve modules may be suspended with a 10:1 design factor.

Operating Mode: Single-amplified w/ DSP
Operating Range: 31 Hz to 135 Hz
LF Transducer: 15.0” woofer, 4.5" voice coil; neodymium magnet
Power Handling @ Nominal Impedance: 1500 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 131 dB / 125 dB (half space)
Equalized Maximum SPL (peak / continuous): 125 dB / 119 dB (whole space)
Dimensions (H x W x D): 469 x 586 x 491 mm / 18.5 x 23.1 x 19.3 in
Weight: 25.6 kg / 57.0 lb

Cardioid Subwoofers

CS118 18 inch Subcardioid Subwoofer

The CS118 incorporates Fulcrum’s proprietary Passive Cardioid Technology to overcome one of the major challenges of many loudspeakers: excessive rear LF radiation. Unlike active cardioid loudspeakers, Fulcrum’s passive cardioid technology does not require an additional amplifier channel or additional transducer to achieve its impressive low frequency directional control: 10 dB of rear rejection over the subwoofer’s operating range.

Operating Mode: Single-amplified w/ DSP
Operating Range: 29 Hz to 137 Hz
LF Transducer: 18.0″ woofer, 4.0″ voice coil; ceramic magnet
Power Handling @ Nominal Impedance: 1200 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 136 dB / 130 dB (half space)
Dimensions (H x W x D): 756 x 624 x 762 mm / 29.8 x 24.6 x 30.0 in
Weight: 54.4 kg / 120.0 lb

CS121 21 inch Subcardioid Subwoofer

The CS121 incorporates Fulcrum’s proprietary Passive Cardioid Technology to overcome one of the major challenges of many loudspeakers: excessive rear LF radiation. Unlike active cardioid loudspeakers, Fulcrum’s passive cardioid technology does not require an additional amplifier channel or additional transducer to achieve its impressive low frequency directional control: 10 dB of rear rejection over the subwoofer’s operating range.

Operating Mode: Single-amplified w/ DSP
Operating Range: 29 Hz to 143 Hz
LF Transducer: 21.0″ woofer, 6.0″ voice coil; ceramic magnet
Power Handling @ Nominal Impedance: 2000 W @ 8 Ω
Equalized Maximum SPL (peak / continuous): 138 dB / 132 dB (half space)
Dimensions (H x W x D): 756 x 624 x 762 mm / 29.8 x 24.6 x 30.0 in
Weight: 59.9 kg / 132.0 lb

 

Tags:  Ip54 ip65 ip66 ip67 всепогодные погодозащищенные 170v 100v 70v сниженное пониженное недостаточное напряжение ток скачки напряжения 360 градусов 360° ° суббас суб-бас бас-бокс мидбас мид-бас midbass subbass mid-bass sub-bass рупор рупорные фазоинвертор фазоинвертер

Компрессионный драйвер Твитер твиттер tweeter неодим neodim ferrite феррит неодимовый ферритовый россия европа сша фрг германия италия палки колонки колонны вч сч нч массив линейный line array 21 2*21 3 4 1 1,5 1,75 2 5 5,5 6 6,5 7 8 10 12 15 18 215 218 2*15 2*18 210 212 2*10 2*12 2*8 2*6,5 2*6 2*5 2*5,5 3*1 +3*1 + 2x21 1.5 1.75 5.5 6 6.5 2x15 2x18 2x10 2x12 2x8 2x6,5 2x6 2x5 2x5,5 3x1 +3x1  2х21 2х15 2х18 2х10 2х12 2х8 2х6,5 2х6 2х5 2х5,5 3х1 +3х1 21” 2*21” 3” 4” 1” 1,5” 1,75” 2” 5” 5,5” 6” 6,5” 7” 8” 10” 12” 15” 18” 215” 218” 2*15” 2*18” 210” 212” 208 208” 2*10” 2*12” 2*8” 2*6,5” 2*6” 2*5” 2*5,5” 3*1” +3*1” + 2x21” 1.5” 1.75” 5.5” 6” 6.5” 2x15” 2x18” 2x10” 2x12” 2x8” 2x6,5” 2x6” 2x5” 2x5,5” 3x1” +3x1”  2х21” 2х15” 2х18” 2х10” 2х12” 2х8” 2х6,5” 2х6” 2х5” 2х5,5” 3х1” +3х1”

Дюйм Активный пассивный со встроенным усилением усилителем  AES RMS EIAJ program peak пик програм программная рмс музыкальная долговременная номинальная акустика для филармонии театра клуба райдерная клубная ресторанная концертная в мск спб крыму москве петербурге санкт-петербурге ресторана улицы уличная мощность f-1 плоские сателлит кабинет волновод рефлекс reflex bandpass band-pass прямого излучения самая музыкальная высокомузыкальная цвет белый покраска сертификат СТ-1 угол 120° 100° 90° 50° 60° 45° 10º 120 100 90 50 60 45 низкопрофильный монитор студийный киноакустика кино сабвуфер субвуфер subwoofer саб звуковое оборудование пресеты preset процессор контроллер встроенный гц hz db дб дба дбн вт ватт w watt thd сигнал-шум коэффициент нелинейных балтийская береза 15мм 18мм 15 18 мм фанера дерево тополь осина рама граундстэк groundstack подвес подвесная полочная фильтры powersoft ram qsc b&c beyma L-Acoustics D&B Audiotechnik динамик давление частота диапазон пиковая максимальная дешево недорого купить приобрести ндс безнал безналичный дизайн испания самый бюджетный на складе настенные напольные -3  -10 -3дб -10дб -3db -10db верхние средние нижние франция 8 ом 4 ом 16 ом 6 ом ohm 20000 18000 23000 см мм kg кг lbs фунт м 120º